ME7 check won't check my file

Pages: [1]

« previous next »

Author

Topic: ME7 check won't check my file (Read 4846 times)

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	ME7 check won't check my file « on: February 25, 2016, 01:33:34 PM »

Hello, I have edited a bit in a file (ME7.5), and now ME7 Check won't check my file, it says that the file is not a valid ME7.x .bin dump.. What could be wrong? I have attached the file here, together with the original. The original checks fine, with no errors. Shocked


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: ME7 check won't check my file « Reply #1 on: February 25, 2016, 01:40:14 PM »

I don't even have to download it to know what's wrong

1024!=1023


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	Re: ME7 check won't check my file « Reply #2 on: February 25, 2016, 01:42:31 PM »

Oh I see, I did the editing through 010 editor, and for some reason the file is now ,02 kbyte smaller - as you mentioned. Any idea what could cause this to happen?


	Logged

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	Re: ME7 check won't check my file « Reply #3 on: February 25, 2016, 01:49:50 PM »

I fixed the problem, some bits had been moved a row, so it didn't match up Roll Eyes

Edit: it didn't fix the problem, but the size almost matches now 1.048.559 byte vs 1.048.576..


« Last Edit: February 25, 2016, 01:53:50 PM by zaoxdk »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: ME7 check won't check my file « Reply #4 on: February 25, 2016, 02:15:38 PM »

Whatever you did, you did NOT fix it, then.

I highly doubt your file is even remotely correct at this point.


	Logged

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	Re: ME7 check won't check my file « Reply #5 on: February 25, 2016, 03:43:42 PM »

What comes up: ME7Check: binary file xxxxx.bin has not correct length (is 0xfffef bytes long, 0x80000 or 0x100000 bytes expected)


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: ME7 check won't check my file « Reply #6 on: February 25, 2016, 03:51:25 PM »

Without being a total cockwomble, why are you adding NLS when you have 13 posts? People should only be allowed access to that script that can upload decent logs first, which shows an understanding of what they're doing.


	Logged

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	Re: ME7 check won't check my file « Reply #7 on: February 25, 2016, 03:52:45 PM »

SOLVED: The problem was located at the bottom of the file, where there was missing the bottom row of empty (FF)'s. What a silly mistake *facepalm*


	Logged

zaoxdk

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 34

	Re: ME7 check won't check my file « Reply #8 on: February 25, 2016, 04:04:19 PM »

Well, I did this as an experiment, to gain more knowledge about the coding itself, seeing how it all connects Wink

Sorry if I took your time, but I guess I placed this post in the correct topic/page..


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 07:47:23 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search