Pages: 1 [2]
Author Topic: Custom can-bus values  (Read 16864 times)
BlackT
Hero Member
*****

Karma: +79/-42
Offline Offline

Posts: 1459



« Reply #15 on: February 14, 2025, 01:22:18 AM »

yes, they are stored in ram locations
so any tweaks available here
I want to send custom values on CAN 280, so Is enought only to change here variables with one I want ( I don't care about conversion factor)
This to me look like CAN-bus data, am I on right trace?
Logged
fknbrkn
Hero Member
*****

Karma: +193/-24
Offline Offline

Posts: 1488


mk4 1.8T AUM


« Reply #16 on: February 14, 2025, 03:03:24 AM »

Yes
You can movb 0xF812, yourVariable instead of mdverlc for example
Logged
elias
Full Member
***

Karma: +21/-3
Offline Offline

Posts: 69


« Reply #17 on: February 14, 2025, 05:47:25 AM »

actually, i had a similar challenge. You can find informations here:
http://nefariousmotorsports.com/forum/index.php?;topic=21150.0

It was only modifying a value which already exists. adding another one
is a little bit different task, but very similar.
Logged
prj
Hero Member
*****

Karma: +1086/-511
Offline Offline

Posts: 6157


« Reply #18 on: February 15, 2025, 08:18:44 AM »

Just activate some message that is not used, for sure not all are enabled (CW_CAN_S).

After that put whatever you want there.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
BlackT
Hero Member
*****

Karma: +79/-42
Offline Offline

Posts: 1459



« Reply #19 on: February 17, 2025, 01:08:33 AM »

Just activate some message that is not used, for sure not all are enabled (CW_CAN_S).

After that put whatever you want there.
But every ME7 bin I open have CW_CAN_S is set to FF

Thank you all for your help
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 13 queries. (Pretty URLs adds 0s, 0q)