Recent Posts

What checksums? Flash/eeprom?

I have a 2002 1.8T ECU ME7.5. I put it into bootmode and when i try to read the eeprom using the ME7 EEPROM tool i am getting this error.

Command: ME7EEPROM_st10 --bootmode 95080 -r -p3 --CSpin P4.7 dump.bin

Code:

ME7_EEPROM v1.40
COM: 3, Baud Rate: 10400
Memory type: 95040, size: 512
Chip Select pin: P4.1
Opening COM3 ... OK
Starting Boot_mode ... uC ID response 0xFF. Unknown ID. (error=0x40201)
Closing COM3

Your ecu has a 95040 eeprom to start, that would be the ID issue.

I have a 2002 1.8T ECU ME7.5. I put it into bootmode and when i try to read the eeprom using the ME7 EEPROM tool i am getting this error.

Command: ME7EEPROM_st10 --bootmode 95080 -r -p3 --CSpin P4.7 dump.bin

Code:

ME7_EEPROM v1.40
COM: 3, Baud Rate: 10400
Memory type: 95040, size: 512
Chip Select pin: P4.1
Opening COM3 ... OK
Starting Boot_mode ... uC ID response 0xFF. Unknown ID. (error=0x40201)
Closing COM3

I know that some ME7.1.1 ECU's can only be cloned. Map data or eprom information is not able to be transferred over alone. It needs the corresponding dataset files(all 3, eeprom, mpc, flash) from the original ECU. Does anyone know what parts of these files need to match?

ya'll are fucking retarded trying to loop this kid into  your own paid platforms and otherwise
its a QKHJ 2.5t ( same soft  as the 04 R in the states, yes )


throwing him on that "if you don't already know then you shouldn't know" spiel ya'll did to me.
what hes asking is free and super simple....

It's only free because someone else did this for you.
And it's super simple because there's 51 addresses. Compared to my def that has 5272.

ya'll are fucking retarded trying to loop this kid into  your own paid platforms and otherwise
its a QKHJ 2.5t ( same soft  as the 04 R in the states, yes )


throwing him on that "if you don't already know then you shouldn't know" spiel ya'll did to me.
what hes asking is free and super simple....

For 4 PINS (Narrowband) to 6 PINS (Wideband) conversion:

ECU -> 51    -> 4 PINS -> 3 -> 6 PINS -> 5
ECU -> 70    -> 4 PINS -> 4 -> 6 PINS -> 1
ECU -> 5    -> 4 PINS -> 2 -> 6 PINS -> 4
+12      -> 4 PINS -> 1 -> 6 PINS -> 3

ECU -> 52 -> 6 PINS -> 6
ECU -> 71 -> 6 PINS -> 2

1EA4E
8x16
factor 0.005000

Thank you very much, I just found it!!!

You really shouldn't post other peoples files on the forum, its not allowed and its not cool at all. You are posting up someone else's work.

1EA4E
8x16
factor 0.005000