So you need a different cable. If you can't make logs, nobody can help you.
VCDS does not produce logs suitable for tuning on ME7.
Hi guys again, i have a fresh news.
I became deeply involved in the issue of equipment and software.
I tried different programs, both visual me7logger and vehicallogger from mr PRJ (thank you so much for your work).
The result is the same everywhere, my ECU does not responde, no matter how hard I try.
Variant with removed the dashboard fuse allready was used (not working).
For example, if I connect the kess(china ofc) and want to get the ID, everything works, remap and etc with kess all works.
VCDS diagnostics works too.
But as soon as the question arises about connecting some kind of logger, there is no positive result.
I tried the dual-k cable that I bought for VCDS, I made it work with the visual logger(by changing drivers to VCP), but the ECU does not response.
I also tried to connect scanmatic 2 pro, separately or through a vehicallogger, but the result is still negative.
Regards,
Daniel