torque intervention can go timing to -11 degree?

Pages: 1 [2]

« previous next »

Author

Topic: torque intervention can go timing to -11 degree? (Read 4681 times)

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: torque intervention can go timing to -11 degree? « Reply #15 on: December 01, 2022, 11:18:05 AM »

Long story short: if your lde is near zero, you should never see actual load/torque be over requested load/torque


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: torque intervention can go timing to -11 degree? « Reply #16 on: December 01, 2022, 02:58:07 PM »

Didnt even log mimax, mibas or any other neccessary torque values. Unless I missed them.
Also for now disable ARMD completely, it likes to fuck about even with DARO and etc set on WOT.


	Logged

vvt18

Full Member

Karma: +2/-74
Offline

Offline

Posts: 139

	Re: torque intervention can go timing to -11 degree? « Reply #17 on: December 03, 2022, 03:59:29 AM »

Thanks Blazius.
Thanks Nyet.
I will add mibas and mimax. I had them few days ago in log config but....maybe i loaded wrong config without them.
I will try to disable antijud.
Other thing , i think is not from my dsg this timing cut, because i rised torque to 550nm in dsg file. I don't think i have more than 500 on my car and the clutch not slip in dsg.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: torque intervention can go timing to -11 degree? « Reply #18 on: December 03, 2022, 02:42:52 PM »

oh god it's a dsg?

could easily be that.


	Logged

vvt18

Full Member

Karma: +2/-74
Offline

Offline

Posts: 139

	Re: torque intervention can go timing to -11 degree? « Reply #19 on: December 04, 2022, 09:41:00 AM »

Hmmmm.
I saw timing cut before only when gears are changed not in the full throttle in a manual mode.


	Logged

vvt18

Full Member

Karma: +2/-74
Offline

Offline

Posts: 139

	Re: torque intervention can go timing to -11 degree? « Reply #20 on: January 26, 2023, 06:43:05 AM »

I saw in golf5 2.0 with dsg , kfzwmn is lower in some point and huge on the finish of rpm
For 1.8t with dsg do you think must be touch? I have -12 degree when gears chganged!


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 09:41:01 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search