AWT swap

Pages: 1 [2]

« previous next »

Author

Topic: AWT swap (Read 18349 times)

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: AWT swap « Reply #15 on: January 26, 2015, 02:42:03 PM »

Ok so both AWT, AWM are interchangeable. What are alternatives to these?

I've scanned through a lot of codes on etka and these also sparked interest:
AWL BGC CFMA AMB ARK AVJ BFB BKB BEX

Anyone knows if they're direct swap (VVT is not important)?

BTW: AEB, AJL, ANB, APU has old style coil sockets (square). On AWT they are newer.

BTW2: Nice find: http://domas.hard.lt/vag-codes-etka/


« Last Edit: January 26, 2015, 02:45:32 PM by masterj »	Logged

ME7Tuner Wizard

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: AWT swap « Reply #16 on: January 26, 2015, 03:54:17 PM »

~~BEX is from S3~~ sorry this was wrong info. Its longitudinal, all transverse blocks you need to change out the manifolds. I personally would just get the cheapest block with the lowest mileage, and then swap over any parts you need. I have an AEB block with APU harness, running on 225 APX file with ME7.5NB and all I needed to swap on the block itself was the cam timing wheel (€5,- from VW) and the throttlebody (scrapyard).


« Last Edit: January 28, 2015, 02:18:41 AM by TijnCU »	Logged

My project (all photos back online!)

_mumin_

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 46

	Re: AWT swap « Reply #17 on: January 28, 2015, 10:29:24 AM »

BFB, BEX, AVJ, AMB all are longitudinal blocks so should be ok .


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 10:49:37 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search