Pages: 1 2 [3] 4 5 6
Author Topic: Re: 032HN No Rear O2, No SAI. Stage Bleh.  (Read 46907 times)
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #30 on: September 09, 2016, 09:25:38 PM »

316lv thanks for trying, I've searched several other sites n even googled for the ecu and nothing comes up. So far I've had  the worst luck for ecus first was my 00 aph bug with its limited ecu and now this one...

Roy your right its is complicated for me. I'm not a tuner or a programmer, i don't know how to use c++ or what the hell I'm looking at with a .bin file i wouldn't even know what to tell you about a log. But i can read and i can follow instructions. I've used the hs/hn def. File and I've followed the instructions on the wiki. I've checked rechecked and checked again every single step but as i said the wiki refers to locations i do not find using the hs/hn def. file. I have 4 errors that just dont go away.  I only care to delete these cause on my other bug with a gonzo tune i always had the cel for the damn sai.
I dont want the cel on and i dont care for the sai, but like many others id like to clean up my engine bay of none essential crap. I know its not easy, i never said it was, But after siting in front of a computer for hours and days trying to do what everyone has said to do "use the s4wiki" it doesn't work. So it'd be nice if ppl would stop giving me shit about coming on here to mooch when im not. Ive been a member for a while, i dont like posting unless i have to simply because of the shit like you have just posted. You make it seem like a cult with your commitment comment. If the file isn't free or open source don't post it for the world to download. I uploaded my .bin file to this forum so what? No one is going to download it? Bs same way i download adams file someone will download mine and possibly thanks to me the forum now has a bin that so far i haven't found on this forum at all. So please get off your hi horse and if you want to make ignorant comments make them somewhere else and don't "crap" on my thread.



Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #31 on: September 09, 2016, 09:32:00 PM »

Id find a spare hn ecu, flash it stock, and see of it works.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #32 on: September 09, 2016, 09:37:33 PM »

Nyet i have a spare ecu but i found it was for a jetta 1.8t awp. "032hf ecu" Not sure if itll work with my bug. Even then the hs/hn def. File again didnt have those locations, ill try and find another def. File but what are the ods of the one i got being a bad file? Specially Since everyone on here is so smart and perfect.
No offense to you.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #33 on: September 09, 2016, 09:42:14 PM »

Shrug. At some point youll have to learn how to find maps yourself. No way around it. If that bothers you you're basically boned.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #34 on: September 09, 2016, 09:54:31 PM »

I dont mind learning this i dont have plans to get rid of my cars i have two bugs, ive owned an mk3 vr6 jetta, and my first vw was a 1.8t golf and been in love with these things since. Thats almost 15 years now...
I know the info is there and the knowledge its just an issue of finding it. My complaint is that everyone likes throwing the search phrase around so easily yet it doesn't find what I'm looking for so my only options are to ask,post,do. I cant do without info i cant ask without ppl getting mad and i cant post cause then i get billigerant,ignorant comments.
So my reply are either aggressive or plane and simple pissy cause i get frustrated :/.

Like Roy thinking i just signed on when ive been a member since 2013 yet now simply cause i was trying to find a solution every one thinks im freeloading.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #35 on: September 10, 2016, 02:00:34 AM »

2 options learn how it works or pay someone to get it done..
Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150


« Reply #36 on: September 10, 2016, 08:31:20 AM »

That HF ECU you have will work for the HS/HN s/w. It is VAG100 just like the HS/HN. IDK if it will work in your Bug, but I have every reason to believe it will for the reasons I stated before.

Attached is an ori HN file and the xdf I use for it. Both came from here. I think the xdf was originally from -adam (cheers!), but I put some time in adding to it. Anything with an '//' in front of it is suspect and may or may not be correct. It has all the variables defined to do what you want anyhow. Use the parameter finder under tools in TunerPro to find them. This xdf lines up with the HS too FWIW.

Flash that to the HF and see if it works for you... Good luck.
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
royce5950
Sr. Member
****

Karma: +18/-44
Offline Offline

Posts: 376



« Reply #37 on: September 10, 2016, 10:58:57 AM »

I dont mind learning this i dont have plans to get rid of my cars i have two bugs, ive owned an mk3 vr6 jetta, and my first vw was a 1.8t golf and been in love with these things since. Thats almost 15 years now...
I know the info is there and the knowledge its just an issue of finding it. My complaint is that everyone likes throwing the search phrase around so easily yet it doesn't find what I'm looking for so my only options are to ask,post,do. I cant do without info i cant ask without ppl getting mad and i cant post cause then i get billigerant,ignorant comments.
So my reply are either aggressive or plane and simple pissy cause i get frustrated :/.

Like Roy thinking i just signed on when ive been a member since 2013 yet now simply cause i was trying to find a solution every one thinks im freeloading.

Sent from my SAMSUNG-SM-G930A using Tapatalk

I do apologize... Sarcasm, pretentiousness and negativity are contagious behaviors often times exercised by a select number of individuals who frequent the nefmoto forums. I seem to have caught the bug there for a moment...  Tongue

Any of the expressions your referring to in my previous post we're mainly a reflection of your first impression on me and likely others as well.. The wording you chose and the use of that meme... Along with what appeared to be a blatant disregard or desire for wishing to learn anything about the tuning process whatsoever... All of those things combined gave me a poor first impression of you... I can see I jumped to conclusion too fast.

Tip for searching. If you didn't already know, when performing a search on nefmoto make sure you ALWAYS return to "home" before performing a new search. I think when you search without going back to "home" it tries to search through the results of the first search. Also, if you want a much better chance of getting the results you want. Go to google and type in        enter search phrase here        site:nefariousmotorsports.com/forum/
Logged

Purchase Tuned Files Ready To Be FlashedFor Audi / VW 1.8T & 2.0T Engines ➡️ TUNEDBYV3@GMAIL.COMSend Me An Email Now And Save BIG On A Performance Tuned File
royce5950
Sr. Member
****

Karma: +18/-44
Offline Offline

Posts: 376



« Reply #38 on: September 10, 2016, 11:09:57 AM »

whats the engine code on your bug? and what is the engine code for HN? I recommend you check both out and make sure your not flashing a file intended for forged rods and other more durable engine components and using that file on an engine without forged rods and what not...

Because if you plan to push the limits after you flash your ecu and tune it (and flash it again lol... and again... and again...), if you have an engine with the weaker rods, depending on how powerful you go you could definitely be looking at a sad couple weeks of work rebuilding a quarter of your engine somewhere in the future... You need to consider what turbo is on your beetle too and what turbo comes on the HN/HS... If you have a k03 and you flash a k04 file that could be a problem. People claim you can run a k04 on a k03/k03s file, but the other way around may cause some unpleasant driving conditions...

Thats just what I would do personally. Check into it or don't its up to you. I just figured I'd contribute what I could with what time I have at the moment.  Smiley
Logged

Purchase Tuned Files Ready To Be FlashedFor Audi / VW 1.8T & 2.0T Engines ➡️ TUNEDBYV3@GMAIL.COMSend Me An Email Now And Save BIG On A Performance Tuned File
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #39 on: September 10, 2016, 01:38:49 PM »

You'll struggle to burst any 1.8t with a k03s without rods. Smiley
Logged
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #40 on: September 10, 2016, 03:43:26 PM »

My turbo bug 00 is the APH motor thats tuned and has the same issue im having now with my turbo s. I removed the sai,egr and have 3" dp no cat same setup both cars and the cel is cause of that.

My Turbo S is AWP with a k03s



Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #41 on: September 10, 2016, 05:14:36 PM »

I removed the sai,egr
My Turbo S is AWP with a k03s

AWP with EGR?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #42 on: September 10, 2016, 05:16:50 PM »

Ok sooooo I dont think you understand some very basic things here, the XDF for the hn will not work for the file
off your car, You either need to change to a well defined file like the HN or learn to define a file... Since i can bet
you will not be doing that. What car are we trying to delete this stuff on turbo s or the other one?
I feeling super nice tonight so if you respond fast enough I will help you with this.
Logged
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #43 on: September 10, 2016, 05:31:33 PM »

Carsinc the turbo s is the one im trying to delete the sai,rear 02 and egr mostly cause the sai was part of the egr so i blocked it off with integrated engineering plate.  is this why i cant get rid of the 4 errors!
The older bug is being converted to a weird thing...

So if i swapped over to the hs or hn file would my immobilizer be an issue?

Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
guyver96
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #44 on: September 10, 2016, 05:34:57 PM »

AWP with EGR?
Yep, you want it lol..

Sent from my SAMSUNG-SM-G930A using Tapatalk
Logged
Pages: 1 2 [3] 4 5 6
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)