Pages: 1 2 [3]
Author Topic: Bosch EV6 TVUB  (Read 12831 times)
q_dubz
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 140



« Reply #30 on: April 16, 2019, 08:56:33 AM »

Solved a problem with the ECU identification, now engine starts with the corrected TVUB , the problem was in the checksum, while IronFelix did not see a problem , WinOLS proposed to correct checksum but after setting changes , and all was well .
Now I have entered the parameters TVUB  of the above post , and corrected KRKTE , but now fuel correction in vsds 32 group
It was to be (add 0.8% , mult 18.8% ) too much difference , I think that the above reported parameters are wrong or I have wrong a bit map .
what was the cause for the high LTFT here?
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)