Pages: 1 [2]
Author Topic: Need original cluster file 2002 gti vr6 12v  (Read 14162 times)
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #15 on: November 25, 2016, 04:36:06 AM »

What were you trying to flash, if you don't know what you're doing?  If you're really that new, the only thing you should be doing is reading the ECU, no writing.
Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #16 on: November 26, 2016, 10:23:14 AM »




Sent from my iPhone using Tapatalk
Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #17 on: November 26, 2016, 10:24:28 AM »


Here are some pics of the cluster


Sent from my iPhone using Tapatalk
Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #18 on: November 26, 2016, 10:24:57 AM »

Take the cluster out of the car. Get the part number from the label and post it.
Someone will get you a stock file but then you have to adapt the cluster to the keys and ecu.
Pics just loaded to post.
Thanks


Sent from my iPhone using Tapatalk
Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #19 on: November 26, 2016, 10:26:56 AM »

What were you trying to flash, if you don't know what you're doing?  If you're really that new, the only thing you should be doing is reading the ECU, no writing.
Your 100 percent correct.


Sent from my iPhone using Tapatalk
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #20 on: November 26, 2016, 11:19:11 AM »

I took a quick look and cant find your exact part number, I have a lot of KM clusters but not many Miles ones.

I found this which is the closest I can see around.
Give it a try, cant be worse then where you are now.

BEFORE YOU FLASH THE CLUSTER>>>>
-Make a backup read of where you are now and post what comes out..
-Do not flash it until you can successfully read the cluster and post it here for us to look at.

I am still thinking you did not flash the cluster in the first place.

On second thought I'm not even going to post the file until you post a read of what is currently on the cluster.

Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #21 on: November 26, 2016, 04:27:37 PM »

I took a quick look and cant find your exact part number, I have a lot of KM clusters but not many Miles ones.

I found this which is the closest I can see around.
Give it a try, cant be worse then where you are now.

BEFORE YOU FLASH THE CLUSTER>>>>
-Make a backup read of where you are now and post what comes out..
-Do not flash it until you can successfully read the cluster and post it here for us to look at.

I am still thinking you did not flash the cluster in the first place.

On second thought I'm not even going to post the file until you post a read of what is currently on the cluster.
Ok will do. I was trying to read it the other day and couldn't tie into it. Any suggestions?  I'm using vag-k commander 2.5.


Sent from my iPad using Tapatalk
Logged
_nameless
Hero Member
*****

Karma: +320/-448
Offline Offline

Posts: 2672



« Reply #22 on: November 26, 2016, 09:56:49 PM »

http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=7994.0;attach=13220
This should be close enough to adapt
You can't brick the cluster it will always accept new eeprom write. Even if the checksums are bad you can log into cluster with vcds and recalc checksums by selecting "do it" under recode and it will up cks
EEPROM PIN = 05004
« Last Edit: November 26, 2016, 10:11:48 PM by Marty » Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #23 on: November 27, 2016, 07:07:41 AM »

Don't flash that file until you successfully read the old file.
And post it here.




Sent from my iPhone using Tapatalk
Logged
Aneves
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 32


« Reply #24 on: November 27, 2016, 07:55:15 AM »

Don't flash that file until you successfully read the old file.
And post it here.




Sent from my iPhone using Tapatalk
Ok you got it.


Sent from my iPhone using Tapatalk
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)