Absolutely FRUSTRATED pulling the SKC....

Pages: [1]

« previous next »

Author

Topic: Absolutely FRUSTRATED pulling the SKC.... (Read 8511 times)

uzone02

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Absolutely FRUSTRATED pulling the SKC.... « on: February 26, 2017, 12:37:40 PM »

test


	Logged

uzone02

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #1 on: February 26, 2017, 12:38:36 PM »

Would someone help please Sad

First thing first, I know it is a so noob question, but I really no way to deal with the SKC
and sorry for my poor english. Cheesy

Here is the story,
someday I blown my ECU, partially, still can drive.
Now I got a NEW (used) VIRGIN cluster ( 0km, willing to marry, no used IMMO and VIN stored )
and a used ECU 8E0 906 018 B , Bosch ME7.5

Let starts.

I follow the instruction written by imnuts & RossTech video https://www.youtube.com/watch?v=J5_51qeEyec&t=200s

When I came to scan for skc / login code

The status bar at the bottom shows

Connecting....
Connected...
Receiving...
Timeout when waiting for response.

I was totally turn into mad. Tried at least 50times, ingition on > read EEPROM > wait > Timeout..... then again > ignition on > read.....

no luck.

But...if I choose ( ... the wakeup pattern 11 ) in the dropdown menu instead of ( .... pattern 01 ),

it reads in a lighting speed !

The login code is 4067.

Then unplug the HEX+Can cable, plug in VCDS cable, start the VCDS 12.12.0

#17 Instrument -> Login - 11 > Key in the SKC: 04067

Nothing pops up after pressing enter

Should be something like this pops up if the login is success

I go on the process

Adaption > Channel 50 > key in the SKC > Test > Save > Ignition off > go for a beer
> ignition on > no VIN / IMMO value shown

Then tried to go pairing the key

No. cant ....

Frustrated

-------

Car: Audi A4 B6 2001-2004 5sp MT 1.8T Quattro, RHD
PC: Windows 10 @ Samsung tablet
Software: K+Can Commander 1.4, 2.5 and VCDS 12.12.0 all China version
Cable:
1. China VCDS cable,

2. VAG KKL 409.1 FT232BL w/ FTDI chip (blue cable with a switch of 4 option on it )

3. China HEX + Can cable

-----------------

I have studied over and over and over and....over again

Lots of source: ie.

Nefmoto, basically all sticky thread have been read

YouTube tutorial RossTech video, ECU swap, Cluster swap, Pairing key...etc

imnuts tutorial @ https://sites.google.com/site/imnuts/home


« Last Edit: February 26, 2017, 12:40:57 PM by uzone02 »	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #2 on: February 28, 2017, 07:18:18 AM »

You have your blown ecu and a new cluster

or

a new ecu and a new cluster?

This is not clear when reading your post.


	Logged

uzone02

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #3 on: February 28, 2017, 08:37:52 AM »

Quote from: aef on February 28, 2017, 07:18:18 AM

You have your blown ecu and a new cluster

or

a new ecu and a new cluster?

This is not clear when reading your post.

Sorry for my poor english

I got a set of Cluster & blown ECU

and

new used virgin cluster & used ECU


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #4 on: February 28, 2017, 08:46:30 AM »

Did both cluster and ECU come from an Audi? They have different pairing issues and they have to match.


	Logged

uzone02

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #5 on: February 28, 2017, 09:02:06 AM »

Quote from: adam- on February 28, 2017, 08:46:30 AM

Did both cluster and ECU come from an Audi? They have different pairing issues and they have to match.

Yup.

ECU also has the same model no. as my original


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: « Reply #6 on: February 28, 2017, 09:02:19 AM »

Did you use new immo transponders?


	Logged

uzone02

Newbie

Karma: +0/-0
Offline

Offline

Posts: 12

	Re: « Reply #7 on: February 28, 2017, 09:34:20 PM »

Quote from: macxxx on February 28, 2017, 09:02:19 AM

Did you use new immo transponders?

nope.

btw can be the key RFID chips reused ?

or need to buy new RFID chip to pair ?


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: « Reply #8 on: February 28, 2017, 10:35:11 PM »

Yes they can be used again , but only to the same immo ( let's sat you SWAP the ecu but your cluster stays , or you SWAP the cluster and your ECU stays )

In your situation you need new chips , or copy eeprom from your blown ECU and write IT to the replacement ECU


	Logged

lorocom

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #9 on: November 10, 2018, 10:41:01 AM »

Did you found out whats the problem am having the same issue


	Logged

seanf

Newbie

Karma: +0/-0
Offline

Offline

Posts: 19

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #10 on: November 24, 2018, 07:25:48 PM »

I've got the same problem, picked up a 4B0907551T ecu from a 2001 tip A6 2.7t today and was going to flash an mbox file on it and put it in my 2.7t swapped B6 A4 but I figured I'd try and pull the SKC for fun since I have to read the 95040 then immo delete it, it won't connect to pull it, I get the same error as above minus the wakeup 11 showing me anything. This is using k commander and I get rx error in vag eeprom programmer, works fine for clusters and other ecus, just not this ecu.


	Logged

JulienR

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 29

	Re: Absolutely FRUSTRATED pulling the SKC.... « Reply #11 on: November 28, 2018, 02:01:08 PM »

Try VAG EEPROM programmer on bench, got the same issue sometimes with vag commander.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 07:27:50 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search