Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
S3 8l BAM after recovery in bootmode - faultcode AMP faulty
Pages: [
1
]
« previous
next »
Author
Topic: S3 8l BAM after recovery in bootmode - faultcode AMP faulty (Read 4432 times)
NicoH
Newbie
Karma: +0/-0
Offline
Posts: 3
S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« on: May 09, 2017, 09:22:23 AM »
Hello,
at first sorry for my bad english...
I tried to flash a new software over OBD using Galletto. It stopped during flashing.
After this i get it out and recovered it by using bootmode.
It works now, the car starts and running. But I get some faultcodes:
control unit - AMP faulty
Speedsignal broken sporadically
Airbag-Crash-Signal broken sporadically
8N0906018BH
Maybe some of you have ideas !
Many thanks in advance !
Logged
sonique
Sr. Member
Karma: +24/-12
Offline
Posts: 283
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #1 on: May 09, 2017, 10:47:58 AM »
i think try flashing another sw version this ecu not original
Logged
yxx499
Full Member
Karma: +4/-10
Offline
Posts: 106
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #2 on: May 09, 2017, 11:35:40 AM »
Post here an ECU ID or a photo with your ECU to give you an Original file.
Logged
NicoH
Newbie
Karma: +0/-0
Offline
Posts: 3
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #3 on: May 10, 2017, 01:27:48 AM »
I've two maps.. the original i read before and the tuned map... i already tried both of them with the same failures.
i think there must be an other failure, one time i could flash over OBD and another try bricks.. than i have to
disassable and recover in bootmode...
Logged
ivan
Full Member
Karma: +2/-0
Offline
Posts: 63
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #4 on: May 10, 2017, 03:30:09 AM »
Look for your original file, the original for your ecu hw number, and try to flashed again then clear fault codes with vcds or other tool.
It looks like it is not the correct software for your ecu.
Logged
ivan
Full Member
Karma: +2/-0
Offline
Posts: 63
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #5 on: May 10, 2017, 03:31:51 AM »
Here you have your original file:
Logged
adam-
Hero Member
Karma: +123/-33
Offline
Posts: 2179
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #6 on: May 10, 2017, 07:25:52 AM »
Where did you get this tuned file from?
Logged
NicoH
Newbie
Karma: +0/-0
Offline
Posts: 3
Re: S3 8l BAM after recovery in bootmode - faultcode AMP faulty
« Reply #7 on: May 10, 2017, 10:31:32 AM »
Thanks for the original File...
The tuned one ist from a good tuner, the file works 4 month without problems so this is not a problem.
I wrote an speacialist and he told me that the hardware seems to be broken.
i will buy a used one and try this..
Many thanks i`ll sent feedback
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 23, 2024, 06:31:42 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...