NefMoto > Technical > Flashing and Chipping > Touareg Kessy cloning (Siemens VDO)
Pages: [1]
« previous next »
Author Topic: Touareg Kessy cloning (Siemens VDO)  (Read 7044 times)
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« on: March 07, 2018, 03:06:08 PM »
I have kessy part number 3D0909135J.
I want to get a used kessy and clone mine onto it as a backup.
What tools do I need to acheive this?
I read about carprog. Can this be done with nefmoto soft and a ft232rl cable?
The kessy is a siemens VDO.
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #1 on: March 09, 2018, 03:03:47 AM »
No info?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433
« Reply #2 on: March 10, 2018, 10:08:07 PM »
You can desolder the 93c86 or read with test clip and burn to replacement kessy.
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #3 on: March 11, 2018, 05:47:16 AM »
I prefer the test clip. Which tool?
carprog or other ?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433
« Reply #4 on: March 11, 2018, 09:11:14 AM »
chip reader i use gq-4x
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #5 on: March 11, 2018, 10:37:16 AM »
I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor?
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #6 on: March 11, 2018, 10:41:59 AM »
Anybody replaced a kessy part number 3D0909135J  with 3D0909135N ?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600
« Reply #7 on: March 12, 2018, 12:57:22 AM »
Quote from: TRespect on March 11, 2018, 10:37:16 AM
I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor?

wrong, you can use the a clip with this reader too

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4406
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #8 on: March 12, 2018, 03:34:33 AM »
Thanks for the link. I'm new to all this :-)
I guess I'm going to go with CarProg:

http://codecard.eu/carprog/software/immobilizer/s4-7-kessy-tool-a8-toureg-phaeton-cayenne-pin-code-reader/prod_167.html
Logged
TRespect
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 72
« Reply #9 on: March 22, 2019, 08:40:20 AM »
It's been a while. I just received a used kessy.
Will be cloning it soon. i'm going for carprog.
http://www.codecard.eu/carprog/software/programmer/s4-7-kessy-tool-a8-toureg-phaeton-cayenne-pin-code-reader/prod_167.html
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 04:53:54 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)