Hello ,I have audi a4 b5 quattro 115 tdi 19
edc 15p
038906019cc
1037354372 0281010304
flah 29f400bt ,
I read the dump with galetto but I dont know if the code pin is on the dump or custer or ?
I read the dump with k can commander and no code to programme news key ,
Can you help me , please ?

https://mega.nz/#!HMN32ajY!Junm51GzNDSUWXN7eIQeUbBxbGdhcTpEw6D_BHysbJc

https://mega.nz/#!HBN0iJxA!L3sg8xBR5cHkn8-LNZ5VITIWMtMJ4qlTsqv6oGFRZhY

Its seems immo2 - so pin only in cluster

But you wont read this cluster with commander , Jeager MM is not working with it , i guess vagtacho works

Commander wont read dump correctly from cluster so no pin

use vageeprom its a pinned post on this forum. Use with your blue kkl cable and read the cluster eeprom. Another option is immo off the eeprom for the ecu abd write a north american b5 cluster eeprom and be done with it. Nirth american cluster eeproms for b5 are not equipped with any immo

ok , merci
I am lost ... help me, of what immo is it ?
and is the code stored physically in eeprom ? if so where?

ok thank
I open ECU
juste for info
in ecu
there iss 24c04 :  512x8 4k

I try to open cluster later for dump

So you have three ways to do it. Tachometer is Jaeger (half fis - BIG Crap)...
One way is dump motor ecu 24c04 and IMMO off it, so car can starts in every condition, and it can be stolen easy in every condition 
Other way is find 'VagTacho' and pull code over OBD, that is the most safety way.

Third way is with normal programmer - Willem, TL866, Batronix, etc.  Eeprom is stored under tachodials, so you need to remove needles, but keep in mind that Jaeger needles are made from very cheap plastic, and they starts to swing after removal.
So choose your way and share files with us, to help

un grand merci

Big thank for all !
I take vag tacho : I want 2 other keys .

if you  have you  some info vag tacho :
how does it work  i2c , can , and why commander k can do not work ?

have good day