Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU

Pages: [1]

« previous next »

Author

Topic: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU (Read 3150 times)

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU « on: May 18, 2018, 02:27:31 AM »

Hi All
In need of any info that can assist me.
I flashed my mk5 gti 2.0 fsi with a stage 2 file via OBD port. The flash did not complete because there was an communication error during the flash.
I tried to flash the file again but without any success. Now I do not have any communication to the ECU.
Can anyone assist me please?


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU « Reply #1 on: May 18, 2018, 02:44:56 AM »

You will most likely need to recover via bdm reader. Did you cross flash or was it your ori file tuned to stage2


	Logged

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU « Reply #2 on: May 18, 2018, 02:48:06 AM »

It was my original file.
I had a base file from eurodyne that I have also tried but no luck.


	Logged

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU « Reply #3 on: May 18, 2018, 03:22:50 AM »

Can it be a CANBUS issue?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 12:17:13 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search