Pages: [1]
Author Topic: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU  (Read 2768 times)
vanrhj
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 55



Hi All
In need of any info that can assist me.
I flashed my mk5 gti 2.0 fsi with a stage 2 file via OBD port. The flash did not complete because there was an communication error during the flash.
I tried to flash the file again but without any success. Now I do not have any communication to the ECU.
Can anyone assist me please?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #1 on: May 18, 2018, 02:44:56 AM »

You will most likely need to recover via bdm reader. Did you cross flash or was it your ori file tuned to stage2
Logged
vanrhj
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 55


« Reply #2 on: May 18, 2018, 02:48:06 AM »

 It was my original file.
I had a base file from eurodyne that I have also tried but no luck.
Logged
vanrhj
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 55


« Reply #3 on: May 18, 2018, 03:22:50 AM »

Can it be a CANBUS issue?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0s, 0q)