Pages: [1] 2
Author Topic: Timing retards bam 1.8  (Read 1180 times)
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« on: September 04, 2018, 10:47:50 PM »

Hello,I am working on my audi tt 1.8 and getting some retards on high RPM.
My trims are near 1 on idle and part
Is that from knock sensor voltages?
« Last Edit: September 24, 2018, 12:35:26 PM by pathanas » Logged
aef
Hero Member
*****

Karma: +43/-20
Offline Offline

Posts: 1112


« Reply #1 on: September 05, 2018, 04:34:57 AM »

upload the untouched csv  Roll Eyes
Logged
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #2 on: September 05, 2018, 04:54:43 AM »

ΟΚ
Logged
spacey3
Full Member
***

Karma: +9/-1
Offline Offline

Posts: 186


« Reply #3 on: September 05, 2018, 05:04:45 AM »

What did you use to log? The logfile is pretty awful.

Retard doesn't look that bad though, just pull a bit of timing...?

Boost is way over the map sensor also I see...
Logged
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #4 on: September 05, 2018, 06:09:57 AM »

I used me7 logger.that is my first log :)I was using vag com
A have a gtx2867 and on this log I am hitting 30,5 psi of boost on 7200rpm.
I was thinking to enrich a little on red line to avoid the retard corrections at first...?
Logged
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #5 on: September 05, 2018, 06:26:05 AM »

I just trying to find the reason of that retard,the knok voltages are not more than 30v EGT and IAT are not too high.
« Last Edit: September 05, 2018, 06:30:18 AM by pathanas » Logged
nyet
Administrator
Hero Member
*****

Karma: +422/-49
Offline Offline

Posts: 9365


WWW
« Reply #6 on: September 05, 2018, 08:44:37 AM »

Why are your separators ; and not commas?

A lot of those values are plain wrong, are you sure you are using the right .ecu definition for your bin?

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +82/-22
Offline Offline

Posts: 1748


« Reply #7 on: September 05, 2018, 09:36:26 AM »

It's been editted/cut.  I bet foreign/incorrect CSV format.
Logged
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #8 on: September 05, 2018, 09:59:45 AM »

The file is exactly how it's been saved from logge, I did only delete the first lines information
On the ecu definitions for the ecu do you mean these I am using on winols?

In order to create the tamplate file I used the modified bin
Logged
nyet
Administrator
Hero Member
*****

Karma: +422/-49
Offline Offline

Posts: 9365


WWW
« Reply #9 on: September 05, 2018, 10:52:22 AM »

The file is exactly how it's been saved from logge, I did only delete the first lines information
Please do NOT UPLOAD EDITED CSVs

Quote
On the ecu definitions for the ecu do you mean these I am using on winols?

In order to create the tamplate file I used the modified bin

The values you are logging are very wrong. Something is amiss.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #10 on: September 05, 2018, 11:18:40 AM »

What do you mean by edited cvs?
What was edited?
Logged
nyet
Administrator
Hero Member
*****

Karma: +422/-49
Offline Offline

Posts: 9365


WWW
« Reply #11 on: September 05, 2018, 12:17:48 PM »

What do you mean by edited cvs?
What was edited?

I did only delete the first lines information
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
aef
Hero Member
*****

Karma: +43/-20
Offline Offline

Posts: 1112


« Reply #12 on: September 05, 2018, 12:47:41 PM »

only use ecuxplot to open the logs and nothing more

not necessary to delete something from the file
Logged
pathanas
Newbie
*

Karma: +0/-0
Online Online

Posts: 14


« Reply #13 on: September 05, 2018, 01:00:22 PM »

only use ecuxplot to open the logs and nothing more

not necessary to delete something from the file

ok thank you, i will try again
Logged
nyet
Administrator
Hero Member
*****

Karma: +422/-49
Offline Offline

Posts: 9365


WWW
« Reply #14 on: September 05, 2018, 01:09:05 PM »

I bet foreign/incorrect CSV format.

Yea, for languages that use commas instead of decimal places, csvs end up semi-colon separated. In any case, that isn't a problem, ECUxPlot can handle semicolons.

the problem is most of the values logged are completely wrong.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)