Pages: [1]
Author Topic: M3.8.2 630cc Injectors Hot Start issue  (Read 3676 times)
hilmito
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 8



« on: December 05, 2018, 03:38:39 PM »

Hello Dear Friends,

I have issue with M3.8.2 ECU   630cc Injectors is Hot start problem. I crank more than 10 sec to start up if engine is hot.   I decrease with 10ms Grundanpassungkonstante , Spannungskorrektur, Startgunden.... and so on, but no result. I post ori file here. Please somebody can help me with this old boy Smiley ..

Thanks in Advance!
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #1 on: December 06, 2018, 04:05:33 AM »

Post your definition so we can help you
Logged
hilmito
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 8



« Reply #2 on: December 06, 2018, 04:50:09 AM »

Here is definitons , but i think on the damos TLST – Startgrundmenge is not on the right address.

 Thanks !
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #3 on: December 06, 2018, 11:52:08 AM »

Tonight I take a look and I return
Logged
hilmito
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 8



« Reply #4 on: December 06, 2018, 01:27:42 PM »

Now i found

 077DA :Startgrundmenge;1x1    - 01219 original bit ...... i change to 00619
077E8 :Startgrundmenge;1x1     - 01219 original bit


after changing the first adress car is start very well when is hot engine.... but i wait 15mins to cool down engine and now is little hard cold start...  I dont know exactly how much need to be this two bits ?
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #5 on: December 07, 2018, 06:40:21 PM »

I will try to adjust FGAT0 at idle, with lambda regulation off and taking in account TVUB values to have a rough estimation about how much ms of PW injection you need to obtain a desired AFR, based in your new injectors for startup. Then you can obtain and idea how much ms should be TLST.
Logged
usuarionuevo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #6 on: December 07, 2020, 04:32:10 PM »

can you upload thta 630cc map for m3.8.2?? i want to try it
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)