M3.8.2 630cc Injectors Hot Start issue

Pages: [1]

« previous next »

Author

Topic: M3.8.2 630cc Injectors Hot Start issue (Read 4114 times)

hilmito

Newbie

Karma: +0/-4
Offline

Offline

Posts: 8

	M3.8.2 630cc Injectors Hot Start issue « on: December 05, 2018, 03:38:39 PM »

Hello Dear Friends,

I have issue with M3.8.2 ECU 630cc Injectors is Hot start problem. I crank more than 10 sec to start up if engine is hot. I decrease with 10ms Grundanpassungkonstante , Spannungskorrektur, Startgunden.... and so on, but no result. I post ori file here. Please somebody can help me with this old boy

..

Thanks in Advance!


	Logged

Tezotto01

Full Member

Karma: +3/-12
Offline

Offline

Posts: 97

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #1 on: December 06, 2018, 04:05:33 AM »

Post your definition so we can help you


	Logged

hilmito

Newbie

Karma: +0/-4
Offline

Offline

Posts: 8

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #2 on: December 06, 2018, 04:50:09 AM »

Here is definitons , but i think on the damos TLST – Startgrundmenge is not on the right address.

Thanks !


	Logged

Tezotto01

Full Member

Karma: +3/-12
Offline

Offline

Posts: 97

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #3 on: December 06, 2018, 11:52:08 AM »

Tonight I take a look and I return


	Logged

hilmito

Newbie

Karma: +0/-4
Offline

Offline

Posts: 8

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #4 on: December 06, 2018, 01:27:42 PM »

Now i found

077DA :Startgrundmenge;1x1 - 01219 original bit ...... i change to 00619
077E8 :Startgrundmenge;1x1 - 01219 original bit

after changing the first adress car is start very well when is hot engine.... but i wait 15mins to cool down engine and now is little hard cold start... I dont know exactly how much need to be this two bits ?


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #5 on: December 07, 2018, 06:40:21 PM »

I will try to adjust FGAT0 at idle, with lambda regulation off and taking in account TVUB values to have a rough estimation about how much ms of PW injection you need to obtain a desired AFR, based in your new injectors for startup. Then you can obtain and idea how much ms should be TLST.


	Logged

usuarionuevo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: M3.8.2 630cc Injectors Hot Start issue « Reply #6 on: December 07, 2020, 04:32:10 PM »

can you upload thta 630cc map for m3.8.2?? i want to try it


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 12:30:34 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search