Chz
Newbie
Karma: +0/-1
 Offline
Posts: 9
|
 |
« on: March 22, 2019, 07:43:54 PM »
|
|
|
The vehicle is a 01 vw cabrio. My wife lost her transponder key. We have a key with no transponder that turns the car on for 1 second. Ive got a kkl 409.1 cable and I do have the ability and deaire to remove the ecu if necessary. Willing to try any option except give vw money. Located in san antonio.
|
|
|
|
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #1 on: March 22, 2019, 07:44:55 PM »
|
|
|
Whoops. Typo in the title. Meant how to read skc.
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #2 on: March 23, 2019, 04:35:04 AM »
|
|
|
The only way to immo off this ecu is lift the Eeprom chip and dump with a chip burner, edit and reburn / resolder. You can't do it wit a cheap clone vag cable. It's a flea chip 24c02. Good luck
|
|
|
|
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #3 on: March 23, 2019, 07:17:17 AM »
|
|
|
Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??
Thanks I really appreciate your response.
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #4 on: March 23, 2019, 12:10:56 PM »
|
|
|
Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??
Thanks I really appreciate your response.
It won't work Because it's in circuit. You need you lift it. |
|
|
|
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #5 on: March 23, 2019, 01:36:31 PM »
|
|
|
Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #6 on: March 23, 2019, 03:13:50 PM »
|
|
|
Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
I believe I have another m5.92 ecu I'll check when I get home if so I can immo off it for you and ship. The cabby has the aba with the dizzy still right? |
|
|
|
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #7 on: March 23, 2019, 06:42:24 PM »
|
|
|
Yes its got the aba and the dizzy its a manual trans
|
|
|
|
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #8 on: March 23, 2019, 06:50:58 PM »
|
|
|
vagcom says
037906018c
Component 2.0l r4/2v motr hs v02
Soft coding 00001
Shop # wsc 00066
And for immobilizer
6x0953257
Component immo 0007
Soft coding 00001
Shop # wsc 25072
Extra : xxxxxxxxxxxxxxxxx vwz1z0y07189459
|
|
|
|
|
Logged
|
|
|
|
|
eliotroyano
|
|
« Reply #9 on: March 23, 2019, 06:58:52 PM »
|
|
|
I have test some M592 ECUs that it E2P can be read but not write ICSP. M38x nope at all. Best bet is to take it out board for proper operation.
|
|
|
|
« Last Edit: March 23, 2019, 07:00:42 PM by eliotroyano »
|
Logged
|
|
|
|
Chz
Newbie
Karma: +0/-1
Offline
Posts: 9
|
|
« Reply #10 on: March 24, 2019, 07:03:43 AM »
|
|
|
So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?
|
|
|
|
|
Logged
|
|
|
|
|
eliotroyano
|
|
« Reply #11 on: March 24, 2019, 07:02:50 PM »
|
|
|
So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?
Yes but just to clarify I have been lucky with some ECUs. Others no. |
|
|
|
|
Logged
|
|
|
|
|
