K04 hybrid soft brick, please advise

Pages: 1 [2]

« previous next »

Author

Topic: K04 hybrid soft brick, please advise (Read 9422 times)

prj

Hero Member

Karma: +1072/-487
Offline

Offline

Posts: 6047

	Re: K04 hybrid soft brick, please advise « Reply #15 on: January 22, 2020, 01:09:48 AM »

Quote from: justinvw2646 on January 17, 2020, 04:01:44 PM

Forgive my ignorance prj, but beyond time where is the cost in a DIY tune???

Last I checked fuel and replacing blown engines wasn't free.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: K04 hybrid soft brick, please advise « Reply #16 on: January 22, 2020, 05:43:19 PM »

Quote from: prj on January 22, 2020, 01:09:48 AM

Last I checked fuel and replacing blown engines wasn't free.

That said, unless you foolishly disable more than a few of the built in ME7 safeties, it is almost impossible to blow a motor.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

prj

Hero Member

Karma: +1072/-487
Offline

Offline

Posts: 6047

	Re: K04 hybrid soft brick, please advise « Reply #17 on: January 23, 2020, 06:25:19 AM »

Quote from: nyet on January 22, 2020, 05:43:19 PM

That said, unless you foolishly disable more than a few of the built in ME7 safeties, it is almost impossible to blow a motor.

K04 will bend rods quite nicely with excessive boost spikes to 1.6-1.7 bar Tongue


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: K04 hybrid soft brick, please advise « Reply #18 on: January 25, 2020, 04:42:42 PM »

Brute rods installed....learned my lesson on that one. I put the ECM into boot mode and read the bin file successfully. Ran me7sum and it fixed all but one checksum, but said the file started with “0” and questioned if it was corrupt. I tried a few times to read the Eeprom using the command prompt eeprom tool from this board, but was never able to get it to connect to read the eeprom. What I found strange about that was I was using the same bench read bootmode sequence that was successful to read the bin off of 2 different ECM’s. When I have some free time again I will post some screen shots.


	Logged

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: K04 hybrid soft brick, please advise « Reply #19 on: January 25, 2020, 04:48:39 PM »

Also totally unrelated, but I did get the car to idle on the 630cc injectors by modifying KRFTE. Fuel trim fluctuating on either side of 0 mvb 33. Super elementary I know, but its a start.


	Logged

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: K04 hybrid soft brick, please advise « Reply #20 on: January 25, 2020, 04:52:32 PM »

KRKTE* new guys.... Roll Eyes


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

December 04, 2024, 01:28:53 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search