Pages: [1]
Author Topic: EV14 modified to single tip? (confused)  (Read 6369 times)
savages4
Sr. Member
****

Karma: +10/-5
Offline Offline

Posts: 251


« on: March 28, 2012, 02:44:44 PM »

So I've been looking around at the various places to buy EV14 injectors from, and I found a guy on ebay who claims to sell a kit that comes with the harness adapters.  However, his listing says they are modified to be single tip, and he's the only factory doing it etc.  What is this single tip modification, and what makes it different from just running the EV14 with just the harness adapters?

Here is the guys listing:

http://www.ebay.com/itm/Authentic-Bosch-EV14-52lb-Single-Tip-injector-Audi-S4-B5-all-road-A6-2-7ltr-/330705468632#vi-content
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: March 28, 2012, 02:54:06 PM »

I'm skeptical. Stock injectors are dual cone.

Look at our intake valve setup; you do NOT want a single cone spray pattern.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
savages4
Sr. Member
****

Karma: +10/-5
Offline Offline

Posts: 251


« Reply #2 on: March 28, 2012, 02:55:47 PM »

So the EV-14s are 8 shooters and the stock are 2 shooters and this guys is a 1 shooter?  I thought the improved atomization was due to the 8 hole design.. Ughhhh now I have to put off ordering injectors until I can figure this out.
Logged
savages4
Sr. Member
****

Karma: +10/-5
Offline Offline

Posts: 251


« Reply #3 on: March 28, 2012, 03:06:07 PM »

Official response from the seller:
The fuel droplets are much finer as fine as a 26lb Bosch. Finer droplets result in better atomization, better combustion, better tuning & overall performance. Just a nicer piece & wrll worth the few extra dollars. Try them if you dont like them I will send you standard 52lbers & refund you the difference in cost. Thank you!

So, I guess this guy thinks their so great he'll swap me out with the regular ones if I'm not satisfied...?
Does what he's saying make sense?
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #4 on: March 28, 2012, 04:45:51 PM »

52# are 630 cc/min @ 4-bar, so 26# would be about 315 cc/min @ 4-bar.  why would you run to run 315 cc injectors when the stock ones are 350 cc?  something doesnt' add up here it seems to me
Logged
savages4
Sr. Member
****

Karma: +10/-5
Offline Offline

Posts: 251


« Reply #5 on: March 28, 2012, 05:02:21 PM »

He's saying it has the ability to spray down to a 26 lb, so obviously he's hinting that the regular ev14's run fat at idle or what?
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #6 on: March 29, 2012, 06:28:41 AM »

Read the description closely.

They are 52#, all the are saying is "For instance this 52lb injector has a fuel droplet as small as a 26lb injector.". I found it doubtful that you'd want to gamble with injectors. Just get the ones with 8 holes and you're guaranteed top notch performance. One tip... dunno. Maybe. If I had a choice, I would swap my 1000cc one tippers to 8 holers in a heartbeat.
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #7 on: March 29, 2012, 07:09:51 AM »

Just thought I'd throw this out there, that I can get EV14's as cheaply as you will find, and I'm willing to hook nefmoto'ers up if interested. Standard 52lb, 650cc, 750cc, 850cc, 1000cc (the same ones I'm running in my car). Just shoot me a PM if you're interested.
Logged
ABCD
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 78



« Reply #8 on: April 10, 2012, 04:13:29 AM »

What does EV stand for?

Is it german? EinlassValve maybe?
Logged
ABCD
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 78



« Reply #9 on: July 02, 2012, 12:09:22 AM »

What does EV stand for?

Is it german? EinlassValve maybe?

got it :einspritzung ventil


but what is 14?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.054 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)