Pages: [1]
Author Topic: Genuine VCDS in HID port usb...can't setting in COM for me7logger  (Read 5789 times)
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226



Hello, i'm still trying to use my vcds genuine cable to run with me7logger.

Can anyone of you help me? Cable under control panel is in Human Interface Device (Ross-Tech v2 ...)
Can't select com port etc...

Any tips ?
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: February 23, 2020, 04:26:56 PM »

Use usb kkl
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: February 23, 2020, 07:36:09 PM »

From what I can tell the latest gen RossTech cables are not FTDI r232 compatible.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #3 on: February 24, 2020, 05:00:29 PM »

Use usb kkl

Any cable kkl 409.1 obd2 available in amazon? (fast shipping)
Logged
aef
Hero Member
*****

Karma: +69/-46
Online Online

Posts: 1566


« Reply #4 on: February 26, 2020, 05:02:04 AM »

just install the vcp mode drivers by ross tech and you will have a virtual com port

its documented in here somewhere
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #5 on: February 26, 2020, 10:09:31 AM »

just install the vcp mode drivers by ross tech and you will have a virtual com port

its documented in here somewhere

That hasn't always worked for me on recent cables YMMV
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #6 on: April 09, 2020, 06:39:14 PM »

That hasn't always worked for me on recent cables YMMV
recent cables it doesn't work reliably if at all. on the hex+usb older (unlimited vin cables) it works fine. even with my Chinese clone one
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)