Yes, using one from here http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=491.0;attach=522
and here http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=491.0;attach=509

Shall go through the s4wiki link, thanks I didn't see that particular page.

Still very new to WinOLS & TunerPro, so youtubed it.
Found out there's me7eskonf https://www.youtube.com/watch?v=0z9U8JBFlH8

Can't find it here though. Is there a trusted source for DL, or even a github available?

Quick example from a stock ME7.5 bin

edit: excuse me for my mistake address is 0x10BF4

This is what I get when I do a search for:
MLHFM
ESKONF

https://s4wiki.com/wiki/Tuning#ME7.1_bit_pairs

From my own ME7.5 "knowledge". See what is installed and what is not. Calculate using binary > hex this should give you a pattern to look for. Atleast that's how I would go about it. And we know it is before KFKHFM, so i believe this method to be quite bullet-proof.

Though i'm not sure if XX would be 10 or 11 but you'll find out fast enough. If you look for it you'll also find ME7ESKONF on here, i must have it somewhere on my PC.

No- that address doesn't match with your 2.7T ME7.1. It comes from my own ME7.5 1.8T. Your ESKONF is twice as large.

Read wiki and it will start to make sense.

Its a wiki; you can edit it yourself. Are you familiar with wikipedia?

Anyway, that looks like a typo. Also ME7.1 only has 6 cyl, not 8, so probably its doubly wrong.


Quite literally, the output pins of the ECU that correspond to the spark plugs.

ESKONF merely represents what outputs are enabled on the ECU.

Totally irrelevant.


no idea what you're saying here. if ESKONF is wrong for EV2/EV4 your car would not start.

Anyway, the ESKONF is "13 bytes in the 2.7 flash"...
"Bit pair legend:
    11 = SKIP, as in that component is not installed.
    10 = SPECIAL TREATMENT. For all intents and purposes, we're going to ignore this.
    00 = INSTALLED

ME7.1 bit pairs

Byte  0: EV6    EV3     EV4     EV1
Byte  1: XX     NWS1    LULK    TEV
Byte  2: XX     EKP     AKF     XX
Byte  3: XX     XX      XX      SLP
Byte  4: EV5    SLV     XX      NWS2
Byte  5: HSH2   ULT     EV2     LDR
Byte  6: XX     BKV     HSH     XX
Byte  7: XX     XX      XX      XX
Byte  8: ZUE    ZUE     ZUE     ZUE
Byte  9: ZUE    ZUE     ZUE     ZUE
Byte 10: XX     XX      XX      XX
Byte 11: XX     XX      XX      XX
Byte 12: XX     XX      XX      XX"  << An assumption

0)   00 - 0000 0000 - EV6 EV3 EV4 EV1
1)   FC - 1111 1100 - XX  XX   XX  TEV
2)   E3 - 1110 0011 - XX  XX   AKF  XX
3)   FC - 1111 1100 - XX  XX   XX   SLP
4)   0C - 0000 1100 - EV5 SLV XX NWS2
5)   00 - 0000 0000 - HSH2 ULT EV2 LDR
6)   C3 - 1100 0011 - XX BKV HSH XX
7)   FF - 1111 1111 - XX  XX  XX  XX
   AA - 1010 1010 - XX   XX  XX  XX
9)   FA - 1111 1010 - XX   XX  XX  XX
10) 55 - 0101 0101 - XX   XX  XX  XX
11) 55 - 0101 0101 - XX   XX  XX  XX
12) 55 - 0101 0101 - XX   XX  XX  XX


corrected to remove:
HSH (rear o2s),
BKV (Brake Booster Pump),
SLP (J299 SAI pump relay) &
SLV (N112 SAI solenoid valve).

0)   00 - 0000 0000 - EV6 EV3 EV4 EV1
1)   FC - 1111 1100 - XX  XX   XX  TEV
2)   E3 - 1110 0011 - XX  XX   AKF  XX
3)   FC - 1111 1111 - XX  XX   XX   SLP -> FF
4)   0C - 0011 1100 - EV5 SLV XX NWS2 -> 3C
5)   00 - 1100 0000 - HSH2 ULT EV2 LDR -> C0
6)   C3 - 1111 1111 - XX BKV HSH XX -> FF
7)   FF - 1111 1111 - XX  XX  XX  XX
   AA - 1010 1010 - XX   XX  XX  XX
9)   FA - 1111 1010 - XX   XX  XX  XX
10) 55 - 0101 0101 - XX   XX  XX  XX
11) 55 - 0101 0101 - XX   XX  XX  XX
12) 55 - 0101 0101 - XX   XX  XX  XX


00 FC E3 FF 3C C0 FF FF AA FA 55 55 55

It helps if I write it all out, to show my 'workings', or errors.

Thank you for all your help, and please forgive my naivety.

Also, don't forget to read threads like this;

http://nefariousmotorsports.com/forum/index.php?topic=615.0