Pages: [1]
Author Topic: Bolt down Coils (ARE) to Push down Coils(BEL)  (Read 1566 times)
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« on: January 13, 2021, 07:07:48 AM »

Hi,

I have a 2002 2.7t allroad (ARE engine) and I am changing from bolts down coils (058 905 105) and removing ICM's to replace them with push down coils (06B 905 115 E).

I have seen the threads on 2.0T coils conversion and what values to change, is this the same with these coils (06B 905 115 E)?

Or am I better of using the values from an allroad BEL map? and also is there a list of maps that need changing? Thanks
Logged
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #1 on: January 26, 2021, 02:10:23 AM »

I am going to answer my own post for others who wish to change from ICM's to push down coils.

I am going to use 4Z7907551R allroad bin and xdf which is available on here and change to values in the following maps from 551m to 551r:

KFTSRL
FSWTM
FSZTM
TSMXNL
TSMNSA
TSMX
KFSZT
FSWTM
FTSDRLW
KFSZDUB
FTSDRLW

Is there any other maps i should change? There is an extensive thread on 2.0tfsi coil values to use on ME7.1, can i use these values for stock 551R coils?

Also what value should i use for FTOMN as i have LC/NLS?

Any help much appreciated
« Last Edit: January 26, 2021, 03:12:43 AM by streacy » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)