A friend came over he just bought a used 2004 Skoda Octavia 1.8t RS 180ps and it has an ABT tune (as the ABT stickers and psychotic service manual of the previous owner suggest)
This car allegedly outputs 210ps now on the dyno. There is a dyno sheet in the glove box.... Also this car has two error codes appearing once every week or so (EGR and boost valve)
-So i read this cars ECU and its tuned file, with KESS after switching on and off the key numerous times as per the kess instructions i got a 1024kb file....
-ECU INFO HW: 0261207440 SW: 1037363908 Engine: 1.8L R4/5VT SW upg.: 06A906032HN 0002 CHASSIS: 1U5 5MT MOTOR: AUQ 180PS
- Wouldn't open with winols so i had to edit out the NOREAD injected text with another binary editing program.
- Downloaded a DAMOS file, wouldnt open with demo winols from their website, had to download an illegal old one i guess....
- So i compare a stock file and the ABT tuned file and the differences are....
1) KFMIRL is changed on the last two load rows a little bit....
2) NMAX to 7314
3) NMAXDV 7306,750
4) KFMLDMX raised last two HPA 900 and 1100 loads after 2250rpm
5) KFLDRL lowered last load row after 1750rpm
6) KFLDHBN all the map maxxed out
7) LDRXN raised a lot after 1500rpm
LDRXNZK same as the previous one
9) KFDLULS maxxed out whole map maxxed out to 1275
So can anyone explain what did they do here ? As far as i understand they didnt change AFR fuel target and Igntiion advance at all.....
The only map im guessing from searching for these acronyms that enabled the car to overboost 1.2bar and fall to 1.0bar is the KFMIRL and the LDRXN and the rest are just limiter maps ? (LDRXN is kidna also as a limiter)
Is tuning so easy with a stock k03 turbo ? That was so anticlimatctic for me since i come from aftermarket ECU tuning background....