Pages: 1 [2]
Author Topic: 8N0906018AB Bosch ME 7.5 burbles  (Read 1106 times)
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 173


« Reply #15 on: September 21, 2021, 12:39:29 PM »

This is the table I get from KFTVSA, the values look fine, but I wanna confirm they are with you guys

Fits:
It is stock KFTVSA of 018AB-TT  dump

Quote
I changed the value to 2.5500 at 2000 - 6600 RPM (on the bottom row, 80.25 C) but its not doing anything on decel

Does it work, when you press clutch ?
Then you missed CWSAWE
« Last Edit: September 21, 2021, 12:50:54 PM by jochen_145 » Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #16 on: September 21, 2021, 01:21:57 PM »

Does it work, when you press clutch ?
Then you missed CWSAWE

I have not tried that yet, but I have tried to search for CWSAWE in winOLS but couldnt find it,
i dont think my car has this feature. Its a 1999 TT
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #17 on: September 21, 2021, 01:38:58 PM »


Then you missed CWSAWE

Offcourse when I post something it only takes 5 minuites untill I find itt... It was over at 11211. It currently is set to '2'. Could you enlighten me what other values I can use?
Logged
Markps1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 4


« Reply #18 on: September 22, 2021, 05:51:58 AM »

is your car stock rods would love burbles on my s3 8l but heard it can damage them
Logged
denniss112
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


Audi TT 99' | 180+HP FWD


« Reply #19 on: September 22, 2021, 07:46:01 AM »

Went out today and kept eye on the fueling side in VCDS. Im sure my KFTVSA is wrong since its not waiting for fuel cutoff, its going straight to 0.

So I put those values back to stock.

With CWSAWE changed to "1" I get nasty bangs on downshifts, sounds amazing.

I think for getting the burbles on decel I need the correct map for KFTVSA. After that I can fine tune how loud and when I want the burbles.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)