NefMoto > Technical > Flashing and Chipping > probably a dumb question.. make keys fit 2 ecus?
Pages: [1]
« previous next »
Author Topic: probably a dumb question.. make keys fit 2 ecus?  (Read 8265 times)
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« on: May 23, 2012, 12:58:51 PM »
I have a ecu 8e0906018, nd the original for my car is 8e0909518. From what I can see both are used for the 2002 a4 b6 1.8t fwd man.

When I put the 906018 in the car  with software from the ori ecu, it wont start because of the immo.
So I was wondering, is it possible to make the immo recognise the key for the for both ecus?

If so, how do I go on to  make my key valid for both ecus?

Thank you Smiley
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923
« Reply #1 on: May 25, 2012, 07:27:43 AM »
read first sticky on top of this forum. That's what you need.
Logged
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #2 on: May 25, 2012, 06:53:52 PM »
Thank you!!  Grin

I read that sticky the other day at around 4am, but my brain didnt catch that  that was the program I needed. Thats wha I get for reading in my sleep :p
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #3 on: May 27, 2012, 06:40:09 AM »
The immo recognizes the key in both cases.
But the immo does not recognize the ECU.

Easiest option - kill the immo in one of the ECU's.
The ECU knows absolutely nothing about your keys.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #4 on: May 27, 2012, 02:37:50 PM »
So, if I read the eeprom from my original ecu and flash it to my spare ecu, the immo will still not let me start the car? I thougt that was the whole meaning of cloning the immo to a different ecu..??

To kill/defeat the immo I would have to desolder the immo chip, right? How is that easier then flashing it?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #5 on: May 27, 2012, 02:54:56 PM »
Quote from: Stompen on May 27, 2012, 02:37:50 PM
So, if I read the eeprom from my original ecu and flash it to my spare ecu, the immo will still not let me start the car? I thougt that was the whole meaning of cloning the immo to a different ecu..??
It will let you start the car. If of course by EEPROM you mean the serial memory.
Quote
To kill/defeat the immo I would have to desolder the immo chip, right?
No. The "immo chip" you are referring to IS the EEPROM.
« Last Edit: May 27, 2012, 02:56:56 PM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #6 on: May 27, 2012, 04:10:19 PM »
I knew that the immo and the eeprom is the same thing... just bad  explaining from my part.   Undecided

How do I kill the Immo on the spare ECU? Any easy way to do it?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #7 on: May 28, 2012, 01:30:47 AM »
Yes, search the forum, it has been explained here.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #8 on: May 28, 2012, 04:00:35 AM »
I have searched the forum... could you please point me in the right direction? Sorry to bother you  with my noobiness ..
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #9 on: May 28, 2012, 07:53:27 AM »
http://bit.ly/KzPBmz
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #10 on: May 28, 2012, 09:35:16 AM »
Hahaha.. nice one Wink

I have the eeprom tool from the first answere here, but I still cant read the eeprom.. I keep getting an error when it searches for the pin... any ideas?
Logged
Stompen
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 95

2002 Audi A4 1.8T
« Reply #11 on: May 29, 2012, 03:46:25 PM »
Figured it out, and flashed the immo over to the spzre ecu. Works perfect  Grin

A big tanks to Julex for showing me in the right direction, and thank you to prj.. I have a seat ibiza in spain where the immo keeps us from starting the car when its too hot outside (faulty ecu??), so next week when I go down there I will kill the immo on it. Smiley
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 12:18:35 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)