Pages: [1]
Author Topic: ME 7.5 1024kb no vin/no immoid 06A906032HL  (Read 2228 times)
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: January 22, 2022, 12:41:22 PM »

Hi guys my first read maybe doesnt work. idk.

i use mpps and 95040 (i will disable only the immo and change later the VIN to my car VIN. I cant see a "login" code like in the posts here in the forum.. maybee well its a 1024kb flash file and not a 512kb flash ?)

can anyone check this file ? i want only a stock - AUM - Manuel gear - NO IMMO

in MPPS i can see ->

check ID ->
Bosch Hardware Number: 0261207438
Bosch Software Number: 1037360644
Vw Software Number: 06A906032HL 0001
System Type Number: 1.8L R4/5VT    G
Flash Program Attempts: 0
Flash Program Counter: 0
ECU Running in Normal Mode

P0171: System Too Lean Bank 1
P0118: Enginge Coolant Temperature Circuit High
P0562: System Voltage Low
P0600: Serial Communication Link

And al lot more -> no power no communication.

i have readed the ecu in this settings:
Speed Options - Medium(Default)

Data Options - Data Only(Default)


When i will check over this 95040tool the file cant read or is damaged ? idk.. Any help? Sry for my horrible english..
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #1 on: January 22, 2022, 01:39:21 PM »

it's not an eeprom read , you uploaded a Flash file from ecu
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: January 23, 2022, 04:31:02 AM »

it's not an eeprom read , you uploaded a Flash file from ecu

Is it not the same ?

i want to check the vin and immo which files needded i for this ? the ecu ? Huh
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #3 on: January 23, 2022, 05:52:06 AM »

Flash contains maps etc it's not the same

Use 95040 epprom tool and read epprom
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: January 23, 2022, 06:11:18 AM »

Flash contains maps etc it's not the same

Use 95040 epprom tool and read epprom

Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ?
Logged
NT1911
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #5 on: January 23, 2022, 06:43:22 AM »

Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ?

okay idont know why but my kkl cable works.. xD Last times this cable wont work driver problems and and and.. but now i have a 1 KB rom file ? ist it right ?

Ok, just to clarify for me:

The data status of 1024 Kbytes is only for performance?

and the small one with 1 Kbytes is only for the immo
?


Is it possible to read out the login of the control unit now?

Or: Can I now change the VIN to any other vehicle as I wish / Or rather change it to my VIN.
« Last Edit: January 23, 2022, 06:46:51 AM by NT1911 » Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #6 on: January 23, 2022, 02:09:05 PM »

Login code is 02190 , just use a normal immo3 adaptation procedure using VCDS ( login to ecu using this code , then channel 50 of adaptation and you put login from your cluster/old ecu )
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)