stock engine awt frp 4bar
original injector 0280156065
KRKTE=0.10478
KVB=298.59375

I want to put
0280158117
with 340l/h pump for e85

are there other maps to adjust?

but I find different calculation krkte

0280158117 makes 588cc for 4bar
Displacement of a cylinder
0.45dm3
KRKTE pump fuel = 0.056225766
 
KRKTE ethanol = 0.083867961

it's no good?

thanks TeknoFi
but I'm not all the maps

hello
 KVB is cc/min? I want to put 0280158117 is 630cc with 4bar? and how to calculate TVUB please. for a noob

thank TeknoFi,

complicate for a noob
on the site I found:
0280158117
58psi/4bar
8v 3.2
10v 1.61
12v 1.155
14v 0.75
16v 0.540
question from noob do i have to modify TVUB? it's my daily to go to work every day. i just want him to swallow e85 and a little more boost

thank you, can someone check my calculations? i took an average of 75% ethanol.in france
In summer (early May to late September): between 75% and 85% In winter (mid-November to mid-March): between 65% and 75%
I have the maps
KVB
FKKVS
TVUB
KRKTE
KFLF

KRKTE Calculator                  

Air density (0  C and 1013hPa)                 -->            1   g/dmˆ3   
Displacement of a cylinder                        -->            0.44525   dmˆ3   
Valve constant with n-Heptane               -->            430.92   g/min   
Valve correction for petrol/n-Heptane -->            1.05      
Air/fuel ratio for Lambda = 1.0                 -->            14.7      
Adaptation of units                                       -->            0.00001667   min/ms   
                  
Injectors flow rate =      630   cc/min         


      KRKTE pump fuel =      0.05192345      

Ethanol content                       -->            75   %   
                  
Stoich value on Ethanol       -->            10.425      

      KRKTE ethanol =      0.0732158

TVUB
8v 3.2
10v 1.61
12v 1.155
14v 0.75
16v 0.540
I can try "my" calculation? or it's bad? I understand the basics setting but calcul it's complicated for my little industrial mechanic head

sorry for my anarchic noob posts


      

thanks again TeknoFi

 yes do a driving test and look trims. I know my calculations are not very good but I think the best is setting log setting log....and big gas

I still have a lot to learn and a lot of maps to find

sorry for my english/french+google translate

Air/fuel ratio for Lambda = 1.0                 -->            14.7

A question. The stoichiometric value of e85 is 9,76 and gas is 14,7.

Should you not change to 9,76 since you run on e85? Or am I missing something?

KRKTE changes quite drastically when changing this value.

yes Andy the value of the primary fuel will have to change a lot in E85 with original injectors but I go almost from 300cc to +600cc 0.07 is only a basic value that I found with the krkte calculator and I I put an average value of 75% E85. And yes the goal is lambda 1.