Pages: [1]
Author Topic: Adjust calculation of ps_w and msdk_w  (Read 550 times)
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 58


« on: November 29, 2024, 09:46:23 AM »

Setup:

OEM Parts
------------
2.7t AGB
FPR S4 B5 (4 Bar)
MAF S4 B5
Throttle body S4 B5


Tuning Parts
--------------
Bigger charge-air cooler
630cc EV14 Bosch injectors
Bigger turbocharger
Bigger exhaust manifold
Intake manifold RS4 B5


I have the following two issues:

- IntakeManifoldAbsolutePressure (ps_w) is higher than ActualBoostPresure (pvdkdsl_w)
- MassAirFlowAtThrottlePlate (msdk_w) is higher than actual MassAirFlow (mshfm_w)

The forum entry http://nefariousmotorsports.com/forum/index.php?topic=14012.msg113563#msg113563 discusses my problems.

According to nubcake I have to adjust all *WDK* maps first:
Basically:
1) ... set WDK maps close enough.

Does this mean that I should adjust the KFWDKMSN and WDKUGDN maps? And what does "close enough" mean?
« Last Edit: November 29, 2024, 09:49:07 AM by M.Mischler » Logged
prj
Hero Member
*****

Karma: +1072/-488
Offline Offline

Posts: 6047


« Reply #1 on: November 29, 2024, 10:56:30 AM »

Your throttle body is stock so KFWDKMSN and KFMSNWDK do not need to be modified.
For msdk_w there is only WDKUGDN.

About ps_w everything is written in that post.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 58


« Reply #2 on: November 30, 2024, 09:29:09 AM »

Your throttle body is stock so KFWDKMSN and KFMSNWDK do not need to be modified.
For msdk_w there is only WDKUGDN.

About ps_w everything is written in that post.

Hi prj

Thank you for answering me so quickly. I will read the relevant part of the FR again, try to make the necessary changes and get back to you here if I come across any problems of understanding.
Logged
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 58


« Reply #3 on: Yesterday at 08:25:29 AM »

About ps_w everything is written in that post.

URL/PRG to adjust VE.

My current understanding is that changes in KFURL have a greater impact on ps_w than changes in KFPRG. But both have an impact on ps_w.

I would like to know if I should only make adjustments to KFURL? Or if I should only adjust KFPRG first. Which is better in your experience?
Logged
prj
Hero Member
*****

Karma: +1072/-488
Offline Offline

Posts: 6047


« Reply #4 on: Yesterday at 04:47:16 PM »

What you wrote makes absolutely zero sense.
KFURL * KFPBRK + KFPRG is the formula. It's basic school math.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 58


« Reply #5 on: Today at 03:27:47 AM »

Hi prj

What you wrote makes absolutely zero sense.
KFURL * KFPBRK + KFPRG is the formula.

Thank you for your feedback.

I'll ask my question differently: what criteria do you use to decide whether to adjust the values of KFURL or KFPRG so that ps_w reaches the desired value?
« Last Edit: Today at 03:56:07 AM by M.Mischler » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)