Pages: 1 ... 15 16 [17] 18 19 ... 37
Author Topic: The 5120 hack - Running up to 5bar absolute pressure on ME7.x  (Read 329245 times)
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #240 on: March 06, 2013, 09:55:33 AM »

Guys, I don't know if you already seen this but KFLDHBN maxes out at ~3 BAR of boost and it will limit LDRXN/LDRXNZK. Have you found a way to overcome this?

3.98 pressure ratio or ~ 43psi... somehow I don't think it will be a problem for anybody but a guy or two but then they can just underscale the maf by a little and that's it.
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #241 on: March 09, 2013, 10:17:31 PM »

Ok, replacement MAP sensor is in, I will resume testing but so far, driving without any boost, the car behaved pretty well with 5120 modification and on stock MAP sensor for last week.
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #242 on: March 12, 2013, 03:56:13 PM »

Hi Julex - Can you please upload a sample .bin file with the current set of changes you've made?  Better yet - if you can, a stock m-box with just the 5120 changes?  If you can't do that, just PM me or email me the bin and I'll modify it myself to be more like a  stock m-box, so that other people can rapidly resume testing with your findings.  Thanks man...
Logged
britishturbo
Sr. Member
****

Karma: +14/-1
Offline Offline

Posts: 306


« Reply #243 on: March 21, 2013, 12:30:09 PM »

Hi Julex - Can you please upload a sample .bin file with the current set of changes you've made?  Better yet - if you can, a stock m-box with just the 5120 changes?  If you can't do that, just PM me or email me the bin and I'll modify it myself to be more like a  stock m-box, so that other people can rapidly resume testing with your findings.  Thanks man...

I can upload a fresh M-Box base. I uploaded one before and there's very few changes from it...
Logged
britishturbo
Sr. Member
****

Karma: +14/-1
Offline Offline

Posts: 306


« Reply #244 on: March 21, 2013, 12:42:43 PM »

Hmm since i have the 2nd post in the thread, i can use it as a placeholder to put reference stock bins...

Sounds Good.
Here's the latest M-Box versions.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #245 on: March 21, 2013, 01:20:05 PM »

What's left to do to finish up the m-box? Is this still a prototype, or are we nearing the final revision? I ask because I'll have cause to use 5bar maf support this week, and can do whatever logging is necessary.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #246 on: March 21, 2013, 02:22:36 PM »

I've gone through about 75-80% of all of the pressure variable references and code and created a bin and xdf.

Unfortunately, I haven't been able to move forward at all recently because my computer is basically a paperweight at the moment.
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #247 on: March 24, 2013, 01:59:52 PM »

This is close enough that I might just give this a shot.  My car is my daily driver, so this would have to be a bolt on and flash type affair.   I'm super picky about code and math, as many of the regulars on the board know already.   In other words, if I can get this running, we'll be in full beta;  not to say other people attempting aren't important - actually quite the opposite.   Rather that this thread has really gone a long way...
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #248 on: March 24, 2013, 07:15:19 PM »

Does anyone have done a 06A906032 ecu with the 5120 hack?
I cant find the necessary maps Sad
Logged
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300


« Reply #249 on: March 25, 2013, 07:56:39 AM »

Does anyone have done a 06A906032 ecu with the 5120 hack?
I cant find the necessary maps Sad

Dunno how similar my 018CH file is to your 032, but I'm about 75% done with identifying all the maps in Bische's text file. I'll upload the map pack when I'm done.

How are you trying to identify them? I used a combo of Bische's .bin and the fully defined TT225 ols. I was able to find all of the maps/constants except in the modules LDRPID, LDUVST, and RKTI. Most of the maps in those 3 sections are already defined though, that was just the point where I stopped.

PS. Many thanks to all who are involved in this project.
« Last Edit: March 25, 2013, 09:16:49 AM by catbed » Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #250 on: March 25, 2013, 08:46:47 AM »

Dunno how similar my 018CH file is to your 032, but I'm about 75% done with identifying all the maps in Bische's text file. I'll upload the map pack when I'm done.

How are you trying to identify them? I used a combo of Bische's .bin and the fully defined TT225 ols. I was able to find all of the maps up except LDRPID, LDUVST, and RKTI. Most of the maps in those 3 sections are already defined though, that was just the point where I stopped.

PS. Many thanks to all who are involved in this project.

Have you cracked open the FR at all?

Those aren't maps, they are functions.
Logged
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300


« Reply #251 on: March 25, 2013, 09:15:04 AM »

Have you cracked open the FR at all?

Those aren't maps, they are functions.

Yes, lol. I misspoke. I meant I found all the maps except for the ones in those modules.
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #252 on: March 25, 2013, 04:50:39 PM »

Im trying to find it by comparing my 06A906032KP with the 518M File.
here is my current status, but i not tested and im not sure in some maps ( functions )

FRLFSDP - 1CD3C ( Pressure Axis: 1CD26 )
KFLDIOPU - 198C8 ( Pressure Axis: 100CE )
LDEIAO - 19908
LDEIAP - 19909
LDEIAPS - 1990A
LDEIAU - 1990B
KFLDIMX - 1E7A2 ( Pressure Axis: 15E4A )
KFLDRQ0 - 1EA34 ( Pressure Axis: 10071 )
KFLDRQ1 - 1EAB4 ( Pressure Axis: 10071 )
KFLDRQ2 - 1EB34 ( Pressure Axis: 10071 )
NLDIAPU - 1EC43 ( Pressure Axis: 1EC41 )
PBKVVSTGPV - 28A4E ( Pressure Axis: 28A42 )
PUEBKV - 28A5A
FLAMPA - 14282 ( Pressure Axis: 1426E )
PADMSA - 1BBD0 ( Pressure Axis: 1BBC4 )
PUELSU - 1BBDC
DSLGRAD - 14EDA
DSLOFS - 14EDC
ZDSU - 18A25
DPDSVLU - 1C816
DSUGRAD - 1C83A
PUE - 1C83E
PUMN - 1C840
PUMX - 1C842
PVDKMN - 1C846
DPUPS - 10D63
KFDLULS - 1F135 ( Pressure Axis: 1F12D )
KFDPVL - 27D18 ( Pressure Axis: 28830 )
KMLTESG - 27D3C
KISRM - 1A55E
KFPRG - 1C6BC
KFURL - 1C758
KVLAD - 10D48
PSSOLNGRD - 14E96
PSSOLPF - 14E98
PSSOLPGRD - 14E9A
FHOKH - 1D248
MSNPCV - 19420 ( Pressure Axis: 19412 )
« Last Edit: March 25, 2013, 05:10:43 PM by maZer.GTi » Logged
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300


« Reply #253 on: March 27, 2013, 07:42:22 PM »

Im trying to find it by comparing my 06A906032KP with the 518M File.
here is my current status, but i not tested and im not sure in some maps ( functions )

*snip*

That looks like a pretty complete list. What are you missing? The pressure constants?
« Last Edit: March 27, 2013, 08:33:04 PM by catbed » Logged
Bische
Sr. Member
****

Karma: +25/-4
Offline Offline

Posts: 397



WWW
« Reply #254 on: March 27, 2013, 08:20:53 PM »

BTW Bische just a heads up, you're missing LDIATA in your ols. For everybody else, its 8 bytes @19C5C

LDIATA is I limit correction for tans, why would that need to be scaled? Smiley
Logged
Pages: 1 ... 15 16 [17] 18 19 ... 37
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)