Pages: 1 ... 8 9 [10]
Author Topic: Recommended USB VAG KKL Cables  (Read 183018 times)
ZakDodge
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 36


« Reply #135 on: October 11, 2019, 11:20:45 PM »

Has anyone found a Galletto cable with a proper digitally signed driver for use with Win 10?

I use a $12 galletto cable off of amazon. works with windows 10. Sometimes ill flash my ross-tech cable to the galletto .ept file and that works even. I have tried to use the Vag K+ Can Commander cables with no luck but those work with me7logger.
Logged
GolfSportWagen
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 67


« Reply #136 on: October 12, 2019, 02:55:43 PM »

Thanks for the reply. Do you have a link to the source of the Galletto/Win 10 viable cable? Are you using the drivers included with the Galletto CD?
« Last Edit: October 12, 2019, 03:19:16 PM by GolfSportWagen » Logged
RicarGli
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #137 on: October 19, 2019, 11:32:46 AM »

I just bought his cable which worked flawlessly with Nefmoto (https://www.ebay.com/itm/FTDI-FT232RL-VAG-COM-KKL-409-1-OBD2-KWP2000-ISO9141-USB-FOR-VW-AUDI/273510962411?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F273510962411%26rvr_id%3D0%26rvr_ts%3De54a34de16d0aaa2893330f1fff58621&ul_noapp=true&pageci=5875c070-97b8-49c5-8f0f-58c3a5e3a56d&epid=1660061025)
Logged
GolfSportWagen
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 67


« Reply #138 on: October 19, 2019, 02:56:54 PM »

Thanks for the link. I have a K-Line cable that is currently working on ME 7.1 ECUs but I cannot find any Galletto cable with proper drivers for Win 10 which is desired for reading/flashing in boot mode.
Logged
316LV
Full Member
***

Karma: +10/-2
Offline Offline

Posts: 150


« Reply #139 on: October 20, 2019, 03:14:46 PM »

Thanks for the link. I have a K-Line cable that is currently working on ME 7.1 ECUs but I cannot find any Galletto cable with proper drivers for Win 10 which is desired for reading/flashing in boot mode.

If you have a working cable, you can just modify Galletto to work with it. No separate cable needed. Here is a link from the late great Daz on how to do it:

http://nefariousmotorsports.com/forum/index.php?topic=3088.msg30597#msg30597

Don't both messing with the cable serial. Just read yours and then use a hex editor on the Galletto exe to input it, save the exe and you are up and going... I've been doing it that way through my last 4 cables (they seem to die when stored in my glovebox - Chinese quality!).
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
GolfSportWagen
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 67


« Reply #140 on: October 20, 2019, 03:40:10 PM »

If you have a working cable, you can just modify Galletto to work with it. No separate cable needed. Here is a link from the late great Daz on how to do it:

http://nefariousmotorsports.com/forum/index.php?topic=3088.msg30597#msg30597

Don't both messing with the cable serial. Just read yours and then use a hex editor on the Galletto exe to input it, save the exe and you are up and going... I've been doing it that way through my last 4 cables (they seem to die when stored in my glovebox - Chinese quality!).

Thanks for the link. I'll look into it and see if we can move forward.
« Last Edit: October 20, 2019, 08:02:37 PM by GolfSportWagen » Logged
Pages: 1 ... 8 9 [10]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)