stage 1 info

Pages: [1]

« previous next »

Author

Topic: stage 1 info (Read 6538 times)

aaronritchie

Full Member

Karma: +3/-0
Offline

Offline

Posts: 90

	stage 1 info « on: March 01, 2013, 11:03:24 AM »

after reading different views on a stage 1 tune for a bam engine , is it true that KMFRIL AND KMFIOP dont need to be touched if i dont want any more than 1.2 bar of boost . I can just cap load using LDRXN and give some extra fuel using KFBLTS ? Thanks


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: stage 1 info « Reply #1 on: March 01, 2013, 11:07:16 AM »

Why not look at KFMIRL and see?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: stage 1 info « Reply #2 on: March 01, 2013, 11:15:02 AM »

KFMIRL is fine alone. KFMIOP might need modding if you run into tq monitroing issues.

Give it a shot and find out.


	Logged

aaronritchie

Full Member

Karma: +3/-0
Offline

Offline

Posts: 90

	Re: stage 1 info « Reply #3 on: March 01, 2013, 11:20:50 AM »

Quote from: nyet on March 01, 2013, 11:07:16 AM

Why not look at KFMIRL and see?

It look possible if i cap LRDXN at 180


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: stage 1 info « Reply #4 on: March 01, 2013, 11:48:47 AM »

Yup. looks fine to me.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: stage 1 info « Reply #5 on: March 01, 2013, 12:02:02 PM »

capping ldrxn @ 180 will yield roughly 1.1bar boost.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

aaronritchie

Full Member

Karma: +3/-0
Offline

Offline

Posts: 90

	Re: stage 1 info « Reply #6 on: March 01, 2013, 12:55:45 PM »

Quote from: ddillenger on March 01, 2013, 12:02:02 PM

capping ldrxn @ 180 will yield roughly 1.1bar boost.

would capping it at 185 or 190 be better. Also i have altered KFBLTS TO ADD EXTRA FUEL and TAGBTS and LAMFA is set to 0.828 at WOT for pre enrichment . Would stock timing be safe to use ? Of course i will do all usual logs to check egt , cf etc.


	Logged

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: stage 1 info « Reply #7 on: March 01, 2013, 01:31:15 PM »

Quote from: aaronritchie on March 01, 2013, 12:55:45 PM

Try it and find out


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: stage 1 info « Reply #8 on: March 01, 2013, 01:53:50 PM »

Quote from: aaronritchie on March 01, 2013, 12:55:45 PM

As the others say try it. But what I will say is reducing the timing down 1-2 degrees at high loads and rpms will decrease the cf's from around 6-8 down to 3ish..


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 11:35:36 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search