Pages: 1 [2]
Author Topic: ECU pin outs for 2001 Audi S4 6-speed  (Read 27056 times)
Tariq Jallad
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #15 on: August 05, 2016, 06:44:54 AM »


The ECU pin listing and pin diagram was exactly what I was looking for while trying to troubleshoot my N249. Thank you for that Tony, I am glad to run into this forum which I just joined.
Question: According to Bently's repair manual and according to your ECU pin list, ECU pin #105 is for N249 connection to the ECU, when I checked my ECU's harness there is no wire in pin #105, that explains why there was no continuity between the N249 plug wire #2 and the ECU pin #105. It looked to me like this is how it is from the factory. Did Audi forget a wire? Has any one run into a similar issue? My S4 is a 2001 6-speed USA market. Please help to clarify this confusion.
Yes, I have the same issue, Pin 105 there is no wire, and N249 is no where to be found on the wiring diagram.
Logged
DRLRS46595
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #16 on: September 18, 2016, 03:26:12 PM »

I have b5 audi 1.8t auto. completely converted into a b5 rs4. v6 manual swap.  I cant get power to ecu .   2000 s4 engine harness trying to mate with the 1.8t auto dash harness? Angry
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)