Pages: 1 ... 20 21 [22] 23 24 ... 43
Author Topic: Overrun Flames, Gargle, Pop  (Read 354632 times)
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #315 on: March 05, 2018, 12:21:15 PM »

I am.unable to find KFTVSAKAT in this file posted

update there isn't a map called that i got it to work as well
« Last Edit: March 06, 2018, 11:42:28 AM by birchbark506 » Logged
StevenW
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #316 on: March 09, 2018, 04:15:54 PM »

what about the me7 with narrow band, there is no CWSAWE which map should i use either?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #317 on: March 10, 2018, 11:58:26 AM »

how do you get it to gargle, i have the pops but the most it will pop is twice, and what RPM is it best to do it at, i currntly have it set at 2500 rpm  at the top three load lines
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #318 on: March 11, 2018, 04:30:42 AM »

Are you at the top load line when you lift?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #319 on: March 11, 2018, 05:25:48 AM »

When you say left off as in shifting this is how my map looks and I get it in a light load when shifting
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #320 on: March 11, 2018, 06:56:28 AM »

I thought you meant the top (maximum) load line.  That's correct.  That's not the only map change though.
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #321 on: March 11, 2018, 09:10:36 AM »

I have changed  KFNWEGM and KFTVSA and  I set   CWSAWE to 1 i don't think med 9.1 has KFTVSAKAT  what other maps are needed?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #322 on: March 11, 2018, 04:10:41 PM »

I have changed  KFNWEGM and KFTVSA and  I set   CWSAWE to 1 i don't think med 9.1 has KFTVSAKAT  what other maps are needed?
i just added a picture of what i have done
Logged
Sbram
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #323 on: March 17, 2018, 08:08:56 AM »

Can someone help me to find the right solution for my Audi TT 2.0 TFSI S-Tronic 200hp BWA?
Logged
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 82


« Reply #324 on: March 22, 2018, 01:55:06 AM »

Have anyone activating and deactivating Bang and Pops with Cruise Control?

I'm interested in this, too.
Heard that someone activated/deactivated it over the Climatecontrol
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401


« Reply #325 on: March 22, 2018, 04:05:30 AM »

Can easily be done by a small assembly function, essentially a map switch. Either switch the whole set of maps or maybe just CWSAWE flipping could work.
Link it to sport mode or whatever.
Logged
QuickS4
Full Member
***

Karma: +6/-6
Offline Offline

Posts: 72


« Reply #326 on: March 22, 2018, 08:37:11 AM »

Can easily be done by a small assembly function, essentially a map switch. Either switch the whole set of maps or maybe just CWSAWE flipping could work.
Link it to sport mode or whatever.
I've been trying to learn how to link and create assembly functions, just not having any real headway with it.  Trying to find that "ah-ha" moment where it all begins to click. 
Logged
ibizaCUPRA18t
Full Member
***

Karma: +2/-28
Offline Offline

Posts: 153


« Reply #327 on: May 06, 2018, 02:04:36 PM »

I've got it perfect on a guy's wideband TT BAM Engine. Changed KFZWMN to -37.5 @ low loads from 3-7k RPM. Changed KFZWOP to x-20 at low loads 3-7k RPM. Simple changes, great results, link here https://vimeo.com/268298778
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #328 on: May 06, 2018, 03:14:32 PM »

can you show a screen shot on your maps please?
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #329 on: May 06, 2018, 11:40:15 PM »

He literally told you the numbers?
Logged
Pages: 1 ... 20 21 [22] 23 24 ... 43
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.042 seconds with 18 queries. (Pretty URLs adds 0s, 0q)