Pages: [1] 2
Author Topic: 4D0907560AF  (Read 13788 times)
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« on: December 06, 2014, 02:27:32 PM »

Need a definition file for 4D0907560AF, or a bin/xdf that would be compatible.  This is a 2001 A8L 4.2L AUX Tip.  Trying to help a friend code out SAI and precats.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: December 06, 2014, 04:17:03 PM »

Need a definition file for 4D0907560AF, or a bin/xdf that would be compatible.  This is a 2001 A8L 4.2L AUX Tip.  Trying to help a friend code out SAI and precats.

Have you read the file? Looked yourself? Before asking for help you should put some effort in. Barring that, how about following the rules?

"All definition requests must be accompanied by an original file"

I'm going to be watching you from now on. You've been here long enough to know better.

*edit*

I had posted the addresses here, but I think that sets a bad precedence. You're going to need to put forth just as much effort as you expect others to.
« Last Edit: December 06, 2014, 04:24:13 PM by ddillenger » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #2 on: December 06, 2014, 08:38:34 PM »

I did read the ECU, and I did search.  Sorry I forgot the file.

Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #3 on: December 06, 2014, 08:44:56 PM »

I found references to your 559E XDF, which I was hoping might work... but it appears to be posted in a forum that no longer exists and I can't find a link to it.
« Last Edit: December 06, 2014, 09:15:38 PM by digitalhippie » Logged
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #4 on: December 06, 2014, 10:23:03 PM »

Here ya go.
You might also check my 560CE XDF as well, the map addresses don't directly match, but will help find most of what you're looking for.
Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #5 on: December 06, 2014, 10:29:33 PM »

MSLUB looks right, thank you
Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #6 on: December 07, 2014, 07:47:05 AM »

I don't see these defined in any of these XDFs.  If someone could help me find these I'd be very grateful.  Just trying to help my friend get his car back on the road...

AHKATMN
AHKATMX
AHKATS
AHKATSB
Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #7 on: December 07, 2014, 02:49:47 PM »

Not sure what else I can do to find these.  I have been unable to find a similar BIN with these variables defined.  And the car is not legally drive-able right now, so can't do any logging on it.  Really just trying to help my buddy who is in a jam.  I've already spent two days on this and can't afford to put much more time into it.  If no one is willing to help me out, I'll have to tell him he's SOL.
Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #8 on: December 08, 2014, 11:01:57 AM »

Alright, guess he's boned.  Thanks anyway.  Sorry I offended you daz, kinda sucks that you know the answer but aren't willing to help out.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #9 on: December 08, 2014, 11:25:34 AM »

Daz holding out on info? That honestly doesn't sound like something he would do...On a side note, I've been looking for a solution on these locations too for quite a bit, with no luck. I may re-visit this mission soon, though, and if I figure it out, I'll post back in here.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #10 on: December 08, 2014, 01:17:42 PM »

Hang tight, I may be onto something... AHKAT stuff seems to be near where I original thought they were on my 560CE ROM, but it's in a different order than the V6 junk.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #11 on: December 08, 2014, 01:27:13 PM »

The issue here is that there's a fine line between helping someone, and just spoonfeeding them answers, especially when all the required info is not provided. I understand you posted your original file elsewhere, but there is a sticky at the top of this forum for a reason.

I don't have AHKAT located in these files.

CDKAT 181A0
CLRHK 11E2E
CWDLSAHK 186C9

CDSLS 181AE
CWKONABG 181B8
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #12 on: December 08, 2014, 01:46:35 PM »

These have a strong chance of being wrong, but I have a good feeling on them, I can cross reference the markers on a 4D0* RS6 ECU and also on my 560CE ROM... So hopefully!

AHKATMN 0x186CF
AHKATMX 0x186D0
AHKATS  0x186D1
AHKATSB 0x186D2
AHKTMXT 0x186D3

Edit:
Check across a few files, the values are within what I would expect them to be, so I do think those are correct. But as usual, adjust at your own risk!
« Last Edit: December 08, 2014, 02:11:09 PM by seishuku » Logged
digitalhippie
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 111


« Reply #13 on: December 09, 2014, 06:21:37 AM »

Thank you both, I'll give these a shot.  If it doesn't work, I think I have enough to code out rear-O2 completely.


daz - I'm sorry you feel like you're spoon-feeding.  ECU work is a loose hobby for me that I only picked up to fix my allroad.  I've been very busy between my full-time job, my other clients, and the lawsuit for the guy who t-boned my jetta wagon a year ago and wrecked my shoulder, requiring surgery.  I haven't had time to really dig in further.  A friend is in a jam and I was just trying to help.  Again, did not mean to offend you.
Logged
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #14 on: December 10, 2014, 02:45:34 PM »

Don't you still have to adjust AHKAT* stuff even when disabling rear O2 control and circuit diag?
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 19 queries. (Pretty URLs adds 0.001s, 0q)