Pages: [1] 2 3
Author Topic: ME7.x Checksum Correction/Check Utility/GUI  (Read 21171 times)
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« on: June 02, 2015, 07:59:00 AM »

Hey guys, so hopefully some people find some use out of this Utility. Thanks to Nyet and 360trev we have the awesome ME7sum and ME7check programs to check the checksum of ME7.x ECU flash binary files and to also correct them. These are console based applications and are honestly pretty easy to use, but if a tuner is constantly making updates and trying new files. It can get tiring to constantly type commands (this is debatable I know).

See original thread for the console applications here:
http://nefariousmotorsports.com/forum/index.php?topic=3346.0title=

Below is a GUI I created to quickly check and correct your .bin file checksums using me7check and me7sum in the background. It's pretty easy to use and anyone can figure it out. Navigate to the Dependencies folder and run "ME7correction.exe".

The source code can be found on GitHub, here: https://github.com/murphtech/ME7.X_Correction

The latest pre-built release can be found here: https://github.com/murphtech/ME7.X_Correction/releases

« Last Edit: January 09, 2018, 12:57:06 PM by Murph » Logged

Lost
Hero Member
*****

Karma: +16/-13
Offline Offline

Posts: 549


« Reply #1 on: June 02, 2015, 11:45:56 AM »

I need this a lot!!! Works just perfect!! Wooow man.
Thanx mate!!!
« Last Edit: June 02, 2015, 11:51:15 AM by Mocke » Logged
vwaudiguy
Hero Member
*****

Karma: +47/-35
Offline Offline

Posts: 1968



« Reply #2 on: June 02, 2015, 03:31:20 PM »

Application does not open in Win XP?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #3 on: June 02, 2015, 03:37:27 PM »

Application does not open in Win XP?

What error are you getting? I'm guessing it has something to do with what version .Net you have installed.

Let me know the error and I'll look into it.
//If your getting one at all that is..

//The target platform was set to use .NET4.5 which isn't supported, I bumped it down to 4.0 which is the highest version supported on XP. This would be an issue for you no matter what. So try the new one out and let me know if that works for yea. (V150602_2)

« Last Edit: June 04, 2015, 01:01:20 PM by Murph » Logged

vwaudiguy
Hero Member
*****

Karma: +47/-35
Offline Offline

Posts: 1968



« Reply #4 on: June 02, 2015, 05:33:58 PM »

That was the issue. Thanks, and great job on the app!
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #5 on: June 02, 2015, 06:54:55 PM »

That was the issue. Thanks, and great job on the app!

Great, thanks for getting back with me on that! Helped me fix a pretty major issue that I overlooked.
Logged

Westwood Developments
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #6 on: January 18, 2016, 08:12:33 AM »

This app is golden!!!!

Hats off to you sir!!!
Logged

GOLF MK1 1.8T 20v AUQ
FMIC            Induction Kit
Forge DV       Forge TIP
2.5"  Turbo Back Exhaust
Stage 2 Map
N249\N112\SAI\Rear o2 Deleted
Anti Lag Launch\No Lift Shift
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #7 on: January 18, 2016, 10:55:25 AM »

Thanks. I'm glad you like it. Let me know if you have any issues or problems using it.
Logged

everydayparadise
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 81


« Reply #8 on: January 27, 2016, 09:35:21 AM »

Thanks for making this. Very helpful.
Logged
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #9 on: January 27, 2016, 08:48:22 PM »

New version up! Can be found in OP.
Logged

jimmcgee5
Full Member
***

Karma: +5/-7
Offline Offline

Posts: 189


« Reply #10 on: January 28, 2016, 06:19:47 AM »

 Smiley thank you very much for this app , it saves a lazy person like myself so much typing  Cheesy Grin.
jim
Logged
tdehrmann1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 13


« Reply #11 on: March 06, 2016, 05:52:23 AM »

I have an issue with the program.

Program starts normal, but always if i click an "Check" an error-message appears with the following content: An error has occured, please be sure me7check.exe, me7sum.exe, and me7correction.exe are all in the same folder: The system cannot find the file specified"

I checked the files but they are in the folder. So, where is the problem here?

The program runs on Windows XP and it's ne newest version of ME7.x Correction. (V160127). The error appears also in older versions.
Logged
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #12 on: March 06, 2016, 07:15:35 AM »

I have an issue with the program.

Program starts normal, but always if i click an "Check" an error-message appears with the following content: An error has occured, please be sure me7check.exe, me7sum.exe, and me7correction.exe are all in the same folder: The system cannot find the file specified"

I checked the files but they are in the folder. So, where is the problem here?

The program runs on Windows XP and it's ne newest version of ME7.x Correction. (V160127). The error appears also in older versions.
I'm not home at the moment but I will this afternoon. It sounds like an issue with the file you are trying to check rather than the program files. (that error message needs rewritten if that's the case)
Logged

tdehrmann1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 13


« Reply #13 on: March 06, 2016, 08:57:49 AM »

I'm not home at the moment but I will this afternoon. It sounds like an issue with the file you are trying to check rather than the program files. (that error message needs rewritten if that's the case)

i tried it with windows 7 and it works

i also have a problem with the anti-lag NLS and LC function but i think thats another problem
Logged
Murph
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 36


« Reply #14 on: March 06, 2016, 09:39:27 AM »

I'm going to rewrite the error messages here in a bit. But basically that message only pops up when the file path is sent into the ME7sum and ME7check programs. Meaning there was an issue with the filename or filepath of the .bin you were trying to check.

//As a side note. This program DOES NOT check for validity/correctness of the tuning or changes made. It only checks and corrects the checksum if needed.
Logged

Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)