Pages: [1]
Author Topic: checksum correct me 7.5 1.8T stage 1 tune  (Read 16145 times)
A6turbofrance
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 117


« on: August 20, 2015, 02:50:15 PM »

can somebody help me correct my checksum
thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: August 20, 2015, 03:56:35 PM »

Please read the sticky before posting checksum requests.

http://nefariousmotorsports.com/forum/index.php?topic=3346.0title=
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #2 on: August 20, 2015, 05:48:34 PM »

something like:

C:\Users\XXX\Desktop\me7sum-v1.0.3>ME7Check.exe
ME7Check v1.12 (c) mki, 06/2004-05/2012
Usage: ME7Check <bin-file>

C:\Users\XXX\Desktop\me7sum-v1.0.3>me7sum.exe
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: me7sum.exe [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
       me7sum.exe [-v] [-i <config.ini>] -s <inrom.bin>

C:\Users\XXX\Desktop\me7sum-v1.0.3>me7sum.exe stanmodifie4.bin stanmodifie4
_chksOK.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'stanmodifie4.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4019.00//24b/Dst02o/220900//'
 Part Number : '8L0906018Q  '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0002'
 HW Number   : '0261206790'
 SW Number   : '1037360287'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x0081F7 CalcAdd=0x0081F7  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xA0920E CalcAdd=0xA0920E  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01bde6 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183C8-0x0183D1                      CalcCRC: F865666E
 1) 0x010002-0x013FFE @8d93a CRC: 7E3A488F CalcCRC: E640C112(r) ** FIXED **
 2) 0x014252-0x017F4E @8d940 CRC: 09D4030E CalcCRC: 99AF1C27(r) ** FIXED **
 3) 0x018192-0x01FBDC                      CalcCRC: 1159FD21(r)
 4) 0x026A00-0x02FFFC @8d946 CRC: E4648543 CalcCRC: FD6BD3E6(r) ** FIXED **

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1f702 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D03D91
    0x00FC00-0x01FFFF CalcChk: 21D0503B CalcCRC: F622C140 SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 56503425 CalcChk: 5652254C ** FIXED **

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in stanmodifie4.bin

Attempting to output corrected firmware file 'stanmodifie4_chksOK.bin'
├╛ Opening 'stanmodifie4_chksOK.bin' file for writing
├╛ Writing to file
├╛ Validating size correct 1048576=1048576
├╛ All OK, closing file

*** DONE! 9/9 error(s) in stanmodifie4.bin corrected in stanmodifie4_chksOK.bin!
 ***
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #3 on: August 21, 2015, 12:35:27 AM »

Hmm, WinOLS reported 7 checksum errors, weird.

My file should be good, but why does ME7Sum report 9, and WinOLS only 7?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: August 21, 2015, 02:06:08 AM »

my ols says 7 as well. but if you correct the file with both ols and me7sum there are no differences between the 2 corrected files.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #5 on: August 21, 2015, 09:49:23 AM »

Hmm, WinOLS reported 7 checksum errors, weird.

My file should be good, but why does ME7Sum report 9, and WinOLS only 7?

There are checksum results inside other areas that are also checksummed.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #6 on: August 21, 2015, 01:34:57 PM »

I checksummed your checksum so you can checksum your checksum?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: August 21, 2015, 01:47:12 PM »

I checksummed your checksum so you can checksum your checksum?

Exactly Wink
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178



« Reply #8 on: July 21, 2020, 06:20:32 PM »

can somebody help me correct my checksum
thanks
this is what it kicked out for me!!!
Logged

W357
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #9 on: July 22, 2020, 12:44:19 AM »

this is what it kicked out for me!!!

there are newer versions of me7sum avail
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178



« Reply #10 on: July 29, 2020, 11:51:39 AM »

there are newer versions of me7sum avail
    ooo didnt know thank you !!!!
Logged

W357
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)