Hello,
I`ve got a Problem with a Golf MK7 Engine in a  MK1 VW.
The Tuner which should take the immo off couldn't do it and we have got the immmobilizer problem.
Does somebody have done a immo off on Simos 18 and could help.
It shouldn`t be for free
Or does somebody know what they have done in the Seat Cup ?
https://video-frt3-1.xx.fbcdn.net/hvideo-xlp1/v/t42.1790-2/12769692_1829482700612497_1459929612_n.mp4?efg=eyJ2ZW5jb2RlX3RhZyI6InN2ZV9zZCJ9&oh=04408907b708a1b818cfe3e371c6cb13&oe=56D60728
Best regards Chris

CMD works on all but the newest ones.

While immo (security) is active?

Yeah, I missed the whole "Immobilizer fucked" part.

No one has done immo off for SIMOS so far. Good luck trying to flash with CMD when their "files" only contain scrambled code areas too.

Why not keep cluster/ecu/key/engine combo

You still have the option to purchase ECU/cluster/key from a legit car, if your engine has non-legit origins.

Not true, people with custom tools have.

But even then, to get it done initially (to flash the ECU) immo must be authenticated.
If immo is not authenticated and immo is on, how are you going to flash it in the first place?

Also, OP mentioned INCA - how are you going to flash an unsigned binary with INCA on an ECU that is not in development mode?

Basically, to even try to immo off anything you need:
1) An ECU with working immo authenticated with the cluster.
2) A custom tool (there is no public tool that you can buy that will allow you to modify code area)

And after that you need to get the software.

Thus this topic is irrelevant. Or as the ECU would say "pre-conditions not correct"