so I have increase ldrxn to 255 and set wgdc to 75% on both maps and requested boost never meets actual. What am I doing wrong?

I'll post logs tomorrow as I'm away from my computer rite now, and I will read thru the wiki more

Barely any boost until 3.2k on a K04 sucks.   Why is engine load so low?  Duty is flat out so either leaks/dead turbo.

Absolutely the last thing you should do. I have zero idea why you think this is at all the case.

ps_w is crazy low, so either your MAF is horribly underscaled or you have a gigantic post maf pre turbo inlet leak.

Spool is incredibly lazy for a K04. Even if we disregard that:

Your LDRXN is still too low, and DIMX is still way too high, or Q2 is way too low, or both.

The whole log is an utter mess, from start to finish.

It isn't clear at all you understand anything from the tuning page, let alone the FR, especially if you think (for some bizarre reason) KFMIRL and IOP have anything to do with the problems you're seeing.

LOL best way is to double and triple and quadruple-check that the car is mechanically sound, and that there are no leaks. But yeah, most people will just say "yeah I've tightened up all the clamps, it's air tight" so what can you expect?

x2

i did a smoke test and there are no leaks, tried the mbc would rather have the n75 there. also for my maf housing i used a 24v vr6 sensor and housing with these maps copied from same file 022 906 032 bm
-MLHFM
-MLOFS
-KFMLDMN
-KFMLDMNX
-KFKHFM
is that correct or is that also wrong...