Pages: 1 ... 12 13 [14] 15 16 ... 21
Author Topic: LC/NLS  (Read 208636 times)
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #195 on: July 23, 2020, 10:08:50 AM »

None of this matters, since the script is *known* not to work on many, many, uncountable images.

Which is why i asked them to post it up so i could see. Its not much work to look into it with him.

honestly i just want to see one person that asks for help actually come back and say oh thanks! yeah here it is... and it hasnt happend yet. its 1-8 posts then they leave.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #196 on: July 23, 2020, 10:29:20 AM »

Which is why i asked them to post it up so i could see. Its not much work to look into it with him.

honestly i just want to see one person that asks for help actually come back and say oh thanks! yeah here it is... and it hasnt happend yet. its 1-8 posts then they leave.

Exactly. This is because the demographic that wants NLS/LS generally doesn't belong here in the first place. Hence this master thread.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
rumianko
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 1


« Reply #197 on: July 30, 2020, 01:39:59 AM »

Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #198 on: July 30, 2020, 08:37:09 AM »

Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help?


Did you write the ASM yourself? If not, start from page one here and read the first few posts again.

Also, please dont post camera photos of your screen. Screen shot if it is graphics, copy/paste if text.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #199 on: July 31, 2020, 08:53:37 AM »

Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help?


The problem is its not referencing the #38h for most of your calls so its failing when it checks for coolant temp. I can try to update it if you answer the thread and dont leave after one post. But i could be wrong since its using movbz... thsts just not how i implemented it.

First change would be to test FOTMN to 1 instead of 0.
« Last Edit: July 31, 2020, 08:59:45 AM by bamofo » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #200 on: August 12, 2020, 09:42:21 AM »

Hello all,

What I did for the tune is I took the antilag/2step bin from here: http://nefariousmotorsports.com/forum/index.php?topic=607.msg5026#msg5026
Then I proceded to follow this guide for stage 2 on that bin that I downloaded from the above link. http://www.myaudis4.com/stage-2/

I flashed it yesterday to my car, waited for flash to complete, and once complete turned off the ignition, and when I clicked the key over, no cel. It damn near killed my ecu. I was only able to recover it once I got it into boot mode and flashed it. No problems since on stock. However I didn't attempt to reflash the tune, because I didn't know if it was something I did, or if it was bad luck. I verified the checksum, corrected the errors, however the ecu took a dump with my file. I attached my completed file before flashing, named STG2_AL_CORRECTED.BIN and also attached the file I pulled off the ecu with galleto while the ecu was in boot mode, if its any help. That file will be named BPULL.bin

I think/hope I just got unlucky, or did something wrong. Any advice is greatly appreciated.



Bootmode back to stock, delete any NLS/LC bin you have on your hard drive, done.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #201 on: August 12, 2020, 09:43:13 AM »

The problem is its not referencing the #38h for most of your calls so its failing when it checks for coolant temp. I can try to update it if you answer the thread and dont leave after one post. But i could be wrong since its using movbz... thsts just not how i implemented it.

First change would be to test FOTMN to 1 instead of 0.

Split to http://nefariousmotorsports.com/forum/index.php?topic=18291.0title= since this is actually useful.

Thank you again, bamofo.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
JavaCrash
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 31


« Reply #202 on: August 16, 2020, 01:34:00 PM »

Bootmode back to stock, delete any NLS/LC bin you have on your hard drive, done.
I did that. I don't know why my ecu didn't like that file, but I bootmoded back to stock, then tried again and I had to bootmode back to stock again. Recreated the file, and it was fine.

If anyone is feeling lazy, or can't seem to get it to work, I have mine attached. My tune is Stage 2 k03 (18psi peak) following this guide: http://www.myaudis4.com/stage-2/

My tune has the EGTs coded out, since mine took a shit. It's an M box tune with hitachi maf.
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #203 on: August 17, 2020, 09:26:24 AM »

I did that. I don't know why my ecu didn't like that file, but I bootmoded back to stock, then tried again and I had to bootmode back to stock again. Recreated the file, and it was fine.

If anyone is feeling lazy, or can't seem to get it to work, I have mine attached. My tune is Stage 2 k03 (18psi peak) following this guide: http://www.myaudis4.com/stage-2/

My tune has the EGTs coded out, since mine took a shit. It's an M box tune with hitachi maf.

Its not coded right thats why its not working. Your referencing FD48.9.

Go back to the script or the tool you used and re-evaluate what you put in there.
Logged
trt2020
Newbie
*

Karma: +0/-10
Offline Offline

Posts: 18


« Reply #204 on: November 06, 2020, 08:59:16 AM »

hi friends ! i tried to add launch control to a 8N0906018J  file with script file . and it doesnt work ! tried and rewrited the file with lc . no luck . can anyone point me in a good direction to solve that ?.. i will attach ori and mod file .
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #205 on: November 06, 2020, 12:24:39 PM »

Merged with master moron thread
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #206 on: November 09, 2020, 09:22:24 AM »

hi friends ! i tried to add launch control to a 8N0906018J  file with script file . and it doesnt work ! tried and rewrited the file with lc . no luck . can anyone point me in a good direction to solve that ?.. i will attach ori and mod file .

Its hard to tell what's wrong without logs. Try this. if LC works but NLS doesn't then you probably have a bad clutch switch.

On your original rom log the following and tell us what you see if you want to figure it out.

TMOTLIN
Clutch pedal
Brake Pedal

Logged
r29vag
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #207 on: November 23, 2020, 12:33:23 PM »

Hi all,

My first time posting.

I followed sn00k's guide but I cant get the AL and NLS to work, car starts and drives.
Bellow are my notes and I have attached the modified bin and xdf.

thank you
Aleks


tsrldyn  0x380BB7      B7  8B
B_kuppl  0x00FD4E.14   27  13
vfil_w   0x381C0C      9c  0c
nmot_w   0x00F89E      9E  F8
wped     0x3809B1      89  B1
B_brems  0x00FD4E.12   27  C0

FTOMN    0x1A43D

Unused ram 0x384B90 0x384036

B7 8B F3 F8 9D 89 D7 40 06 02 03 F8 26 24 9D 02  ORIGINAL LINE LINK IN.





9A 27 13 E0 F2 F4 0C 9C D7 00 81 00 F2 F9 00 7E  DONE

40 49 9D 0B F2 F4 9E F8 D7 00 81 00 F2 F9 02 7E  DONE

40 49 FD 03 F7 8E B7 8B 0D 2F 9A 27 29 E0 8A 27  DONE

22 C0 F2 F4 9E F8 D7 00 81 00 F2 F9 06 7E 40 49  DONE

FD 1A C2 F4 89 B1 D7 00 81 00 C2 F9 08 7E 40 49  DONE

FD 12 D7 00 38 00 F2 F4 90 4B D7 00 81 00 F2 F9  DONE

04 7E 40 49 9D 11 F7 8E B7 8B 08 41 D7 00 38 00  DONE

F7 F8 90 4B 0D 09 D7 00 38 00 F6 8F 90 4B 0D 04  DONE

D7 00 38 00 F6 8E 90 4B F3 9D 89 8A DB 00 FF FF  DONE
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #208 on: November 23, 2020, 01:46:06 PM »

kind of hard to follow w/o posting ASM
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #209 on: November 24, 2020, 05:49:12 PM »

Hi all,

My first time posting.

I followed sn00k's guide but I cant get the AL and NLS to work, car starts and drives.
Bellow are my notes and I have attached the modified bin and xdf.

thank you
Aleks


tsrldyn  0x380BB7      B7  8B
B_kuppl  0x00FD4E.14   27  13
vfil_w   0x381C0C      9c  0c
nmot_w   0x00F89E      9E  F8
wped     0x3809B1      89  B1
B_brems  0x00FD4E.12   27  C0

FTOMN    0x1A43D

Unused ram 0x384B90 0x384036

B7 8B F3 F8 9D 89 D7 40 06 02 03 F8 26 24 9D 02  ORIGINAL LINE LINK IN.





9A 27 13 E0 F2 F4 0C 9C D7 00 81 00 F2 F9 00 7E  DONE

40 49 9D 0B F2 F4 9E F8 D7 00 81 00 F2 F9 02 7E  DONE

40 49 FD 03 F7 8E B7 8B 0D 2F 9A 27 29 E0 8A 27  DONE

22 C0 F2 F4 9E F8 D7 00 81 00 F2 F9 06 7E 40 49  DONE

FD 1A C2 F4 89 B1 D7 00 81 00 C2 F9 08 7E 40 49  DONE

FD 12 D7 00 38 00 F2 F4 90 4B D7 00 81 00 F2 F9  DONE

04 7E 40 49 9D 11 F7 8E B7 8B 08 41 D7 00 38 00  DONE

F7 F8 90 4B 0D 09 D7 00 38 00 F6 8F 90 4B 0D 04  DONE

D7 00 38 00 F6 8E 90 4B F3 9D 89 8A DB 00 FF FF  DONE


You had a bunch of things wrong in here. I sent you the file and asked to publish it fixed here if it is indeed fixed. Things i noticed

1) Battery hook wasnt sending to the right hex
2) Nmot was the wrong one. you want the one that has a multiplier of 40, not .25
3) exit was wrong of the whole routine, you need the original hex that you hooked in there.
4) brake hook was wrong
5).... there were more. thats why i just fixed it and sent it off for testing.
Logged
Pages: 1 ... 12 13 [14] 15 16 ... 21
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.058 seconds with 18 queries. (Pretty URLs adds 0s, 0q)