Pages: 1 [2]
Author Topic: R8 V10 MED9.1 525PS - read or flash with MPPS (original)??  (Read 13732 times)
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #15 on: May 18, 2017, 10:03:01 AM »

Depends on the version...Same goes with the rs4 4.2 round about 3x mins per ecu and some older r8s.

RS4 B7 MED9 NEVER flashes in 3 mins per ECU, EVER. unless your time is different than my time. not that I haven't flashed over 300 of either of those ECUs or anything, but hey, you never know. Normal flash time for those flashing 5 blocks into each ECU is around 8 minutes give or take.
Logged

I have no logs because I have a boost gauge (makes things easier)
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #16 on: May 18, 2017, 10:58:03 AM »

Depends on the version...Same goes with the rs4 4.2 round about 3x mins per ecu and some older r8s.

RS4 B7 MED9 NEVER flashes in 3 mins per ECU, EVER. unless your time is different than my time. not that I haven't flashed over 300 of either of those ECUs or anything, but hey, you never know. Normal flash time for those flashing 5 blocks into each ECU is around 8 minutes give or take.

You are the only person quoting 3 minutes here.

Logged
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« Reply #17 on: May 18, 2017, 10:19:19 PM »

Wrong. all 420 (old) R8s have MED9 even up to 2015, but 2012+ ones can't be done through OBD with the conventional tools out there. Only 4S0 R8 has MED17.

ok, thanks  Smiley
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #18 on: May 19, 2017, 01:07:28 AM »

RS4 B7 MED9 NEVER flashes in 3 mins per ECU, EVER. unless your time is different than my time. not that I haven't flashed over 300 of either of those ECUs or anything, but hey, you never know. Normal flash time for those flashing 5 blocks into each ECU is around 8 minutes give or take.


You are the only person quoting 3 minutes here.



LOL that's because I thought he meant 3 mins instead of 30+ mins Cheesy
Logged

I have no logs because I have a boost gauge (makes things easier)
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449


« Reply #19 on: May 19, 2017, 05:57:40 AM »

RS4 B7 MED9 NEVER flashes in 3 mins per ECU, EVER. unless your time is different than my time. not that I haven't flashed over 300 of either of those ECUs or anything, but hey, you never know. Normal flash time for those flashing 5 blocks into each ECU is around 8 minutes give or take.

3x 30+ something......i used the X because it was round about that time...You misunderstood.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #20 on: May 19, 2017, 06:24:02 AM »

reading takes 14-18 mins per ECU, flashing 8 per ECU, maybe 10 if you use slow tools.
Logged

I have no logs because I have a boost gauge (makes things easier)
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #21 on: July 18, 2017, 01:48:55 AM »

Back to the original question, which tools work with this ecu?  Smiley
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
S2evo1
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #22 on: July 18, 2017, 11:30:52 PM »

CMD, KESS, Magic x17 and I-flash works
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #23 on: July 19, 2017, 09:04:56 AM »

CMD, KESS, Magic x17 and I-flash works

Thanks
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« Reply #24 on: January 03, 2018, 12:15:46 AM »

bought original EVC BDM100 - perfect!  Smiley
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)