Pages: [1] 2 3 ... 5
Author Topic: PID 2.7T Hybrid  (Read 22106 times)
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« on: September 25, 2019, 02:35:34 AM »

I’m trying to set up K-03 hybrid turbos.
I set CWMDAPP to 8, wrote about 12 logs with different DC and filled KFLDIMX with the right DC values. At least DC values are very-very close to the truth.
Turbos are K-03 Hybrid. At 2700RPM and 95%DC the boost is about 1000mbar, at 3000RPM it’s already 1520-1540mbar.
But after I changed CWMDAPP from 8 to 0 everything goes weird.
Requested DC goes up and down all the time. I’ve tried to zeroed KFLDRQ2 and LDRQ0DY and the same thing. I’ve tried to set the same values and nothing has changed.
So I’m really stuck with it. I’ve always thought that DC = KFLDIMX  + LDRQ0DY - KFLDRQ2. But it looks like I was wrong. KFLDRL is lineal. 20% = 20%, 95% = 95% etc.
Another problem is ME7 Logger. I can’t connect it to the car. The echo test is ok, then slow init and nothing. I use genuine VCDS. So I have no chance to find out what’s happening with P, I, D separately.
Any help would be appreciated.
« Last Edit: September 25, 2019, 02:57:53 AM by terminator » Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #1 on: September 25, 2019, 03:54:42 AM »

http://nefariousmotorsports.com/forum/index.php?topic=12352.0title=
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #2 on: September 25, 2019, 10:08:37 AM »

You're not going to be able to do PID tuning w/o me7logger.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #3 on: September 26, 2019, 01:31:58 AM »

Because VAG COM is too slow?
I tried ME7Logger on another laptop and got the same problem: slow init 11 and no connection.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #4 on: September 26, 2019, 02:28:58 AM »

Because you can't log any of the PID variables.
Also, KFLDIMX is not a WGDC table, it's I limit...
Logged

PM's will not be answered, so don't even try.
Log your car properly.
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #5 on: September 26, 2019, 03:06:34 AM »

Ok, thanks.
I don't know why ME7Logger could not connect. Maybe the ECU address is not 0x11?
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #6 on: September 26, 2019, 03:54:03 AM »

I've just read the thread
http://nefariousmotorsports.com/forum/index.php?topic=12466.0title=

So I'm gonna try this way today.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #7 on: September 26, 2019, 09:46:11 AM »

If this is ME7.1 you should have no k line issues unless you have an aftermarket radio on the kline.

I'd try different VCDS drivers, in particular the VCP driver, and make sure boot intelligent mode is off. This is all mentioned in the various README and you didn't mention if you tried them.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #8 on: September 26, 2019, 11:33:36 AM »

and try slow 0x00 for the proper 5 baud init, can also try to pull dash fuse in conjunction.
« Last Edit: September 26, 2019, 11:35:09 AM by Blazius » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #9 on: September 26, 2019, 12:14:07 PM »

Next time please note the P/N

i see it is 4z but please put it in the topic at least. I had to download your rar and unrar it to figure it out.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #10 on: September 28, 2019, 11:24:07 AM »

Thanks to everyone, but now I just can't connect at all, because of ftd2xx.dll
I posted it here
http://nefariousmotorsports.com/forum/index.php?topic=837.480


Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #11 on: September 28, 2019, 11:53:13 AM »

The dll should come with the standard ftdi driver
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #12 on: September 28, 2019, 12:11:45 PM »

Maybe it's a stupid question, but where can I get the standard ftdi driver?
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #13 on: September 28, 2019, 01:31:52 PM »

I've solved it. I copied ftd2xx.dll to Wow64 folder (not System32),  because Windows 64bit.
While ignition is turned on, me7logger can be connected as well. (Slow init 0x00)
Now I have another problem. When the engine is started, the logger can't be connected to the car. I attached the screenshot.

Should I pull the fuse?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #14 on: September 28, 2019, 01:45:59 PM »

I've solved it. I copied ftd2xx.dll to Wow64 folder (not System32),  because Windows 64bit.
While ignition is turned on, me7logger can be connected as well. (Slow init 0x00)
Now I have another problem. When the engine is started, the logger can't be connected to the car. I attached the screenshot.

Should I pull the fuse?


Connect before starting car and/or try pulling dash fuse.
Logged
Pages: [1] 2 3 ... 5
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)