Hi guys,

I'm learning ME7.5 and always when i ask somebody about something they always say: "check the nefmoto community stage1 project". So i did.

I'm bit confused of this what happens in that files as they look like this.

Maybe LAMFA looks ok, but this what i found in KFMIRL looks like some random values. Same with KFMIOP.
I have downloaded all 3 files(stock, mod, and xdf) from first post.

What is wrong with those files/my tunerpro?

Saying thanks!

Picked up 2003 A4 Avant in good working condition.  Was thinking of spending approx $500 CAD on a stage 1 tune...

Eventually found this forum, joined, learned.  Had 'blue cable' already.  Took the advice of using a car charger to keep the voltage up.

Backed up my BIN.  Flashed stock bin.  Would not start - flash back to my BIN.  Car OK again.

Learned to edit that single HEX value in stock file and then re-checksum it.  Flashed stock BIN again, car works fine.

Stage 1 V7 BIN did not have that HEX value, so flashed it.  Car works fine.  Pulls noticeably harder and runs just like stock. Awesome!

BIG THANKS

It's like a Christmas present to myself! 

How did you end up fixing it? im having the same issue, i used the v7 stage 1 and log seems stock still. Thanks

Good day. I'm trying to activate VVT ​​on an AUDI A4 B5 1.8T 5HP19L. The following maps were found and modified:
CDNWS 2 => 3
CWNWSG 0 => 1
CDTENWS 220 => 733
CDTENWS 326 => 745
KFNWSE 18 =. -4 760RM => 4000RM
KFNWWLE everywhere 18

Help me find the FNWTME address

Do I need to change more cards to activate VVT?

I changed these maps for tune 06A906032HF and VVT was active