Pages: 1 ... 19 20 [21] 22 23 ... 43
Author Topic: Overrun Flames, Gargle, Pop  (Read 354565 times)
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #300 on: November 16, 2017, 11:24:31 AM »

What is KFTSVA set to?
Logged
ReproLogic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #301 on: November 16, 2017, 12:19:37 PM »

POST NUMBER 2:

Quote
KFTVSA is the time in seconds i think before fuelcut is activated. But its active only when clutch is depressed. At least thats how ive seen it work on Volvos.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #302 on: November 16, 2017, 02:18:37 PM »

POST NUMBER 2:


Also mentioned several times in this thread:
CWSAWE negates the need for a depressed clutch.
Logged
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #303 on: November 17, 2017, 01:24:04 AM »

swsawe = 0

kftva= 2.8 between 300 and nmax on 60 and 80ºc

KFNWEGM= 5080(maxvalue) on 60º and 80º

BR and thank you so much
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #304 on: November 17, 2017, 07:52:40 AM »

swsawe = 0

kftva= 2.8 between 300 and nmax on 60 and 80ºc

KFNWEGM= 5080(maxvalue) on 60º and 80º

BR and thank you so much

I wouldn't alter KFNWEGM, but every man his taste.
But I assume you have close to zero engine braking and poor fuel economy?

You also need to set CWSAWE=1 if you want it to work without having to press the clutch.

I have 0.5s total overrun, and I get a nice pop and gargle on shift with a heavy foot, and a gargle on normal driving.

Read the thread again until you understand what you are doing to your car.
« Last Edit: November 17, 2017, 08:08:18 AM by KasperH » Logged
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #305 on: November 17, 2017, 05:58:11 PM »

yes cwsawe =1, I let kfnwegn stock and now run better.
Logged
Midi-fighter
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #306 on: January 11, 2018, 07:26:32 AM »

https://youtu.be/AIjPuucCXJU

Finally working!

Only KFZWMIN moded, stock KFZW & KFZWOPT.

sorry for my reply:

soo you only changed KFZWMIN and nothing else ?
and which parameters did you enter ?

can i done this to my audi a6 4b c5 2.7t 2001 ? i think its a me7.1
done only ms41 before in my e36 with overrun and other things
(if you need help with your ms41 in your e36 i can modify your ecu bin if you can help me with my 2.7t [for all in this forum] )


Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #307 on: January 11, 2018, 08:45:49 AM »

He did it on MED17.5.
I don’t even think what he has done if possible on me7.5 let alone 7.1 without code change and a new min timing map for ac on/off
Logged
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« Reply #308 on: January 19, 2018, 04:40:15 PM »

From your logs, does the timing go down to minus' and then to 0 and back again continuously?

Mine is doing that and is confirmed by the bangs - pops and bangs -> quiet -> pops and bangs -> quiet

Anyone have any suggestions to what could be intervening?

Did anyone get to the bottom of this? All the logs of over run I've taken do this. Big junpys between BTCD and ATDC. Would be good to get it in ATDC for as long as desired. More chance of decent bangs/flames i think
Logged
killerx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #309 on: January 25, 2018, 10:14:35 AM »

who knows where is CWSAWE in 8N0906018J file? Thanks
Logged
grey
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 146


« Reply #310 on: January 25, 2018, 11:47:12 AM »

who knows where is CWSAWE in 8N0906018J file? Thanks

Try @11211 for 8N0906018J_360314
Logged
killerx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #311 on: January 25, 2018, 12:53:49 PM »

Try @11211 for 8N0906018J_360314

thanks, I'll try after weekend and report here
Logged
ulek3pl
Full Member
***

Karma: +8/-6
Offline Offline

Posts: 81


« Reply #312 on: January 29, 2018, 12:08:49 PM »

hello! do somebody know map adress where to disable fuel cut in 1.8t agu engine ( m3.8.3 06A906018CG ) ? or maybe some idea to gargles in deccel like this: https://www.youtube.com/watch?v=ygeEnzkTPMQ
Logged
OTO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #313 on: February 25, 2018, 11:22:26 AM »

Hi.
I try to get some gargles but something strange happens.

I modify KFZW, KFZW2 and KFZWMN_0, KFZWMN_2 to -15 degree

If i raise rpm above 3500-4000rpm ecu start asking max load and 15% load about 0.2sec cycles.

Why ecu start asking max load?

« Last Edit: February 25, 2018, 11:24:21 AM by OTO » Logged
Kurtl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #314 on: March 04, 2018, 06:28:13 AM »

Have anyone activating and deactivating Bang and Pops with Cruise Control?
Logged
Pages: 1 ... 19 20 [21] 22 23 ... 43
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)