Pages: 1 ... 32 33 [34] 35 36 ... 43
Author Topic: Overrun Flames, Gargle, Pop  (Read 354512 times)
soul87
Jr. Member
**

Karma: +5/-0
Offline Offline

Posts: 44


« Reply #495 on: October 20, 2019, 11:35:41 PM »

go to FR and check review the BBSAWE function.

Hint (not sure if it will solve: check KFTVSA KFTVSAKAT TVSAG0 TVSABTE)
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #496 on: October 21, 2019, 12:38:16 AM »

I will do more digining. It is not connected to seconds, somethnig else control fuel cut.
These are two logs
One after 3 gr. wot, and one after 6 gear run

Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #497 on: October 21, 2019, 04:45:11 AM »

I think once it gets to lambda=1 then ignition follows another path.
Logged
razor1199
Jr. Member
**

Karma: +3/-1
Offline Offline

Posts: 44


« Reply #498 on: October 22, 2019, 02:40:44 PM »

Ok, I've read whole topic, but I still need an advice Sad
I want to reach something like this https://www.youtube.com/watch?v=VWH3pkD5Ru4 (it hasn't to be that agressive as the loudest one, but something like that, still don't want to flame from pipes).
In a few words, I want gargles on engine deaccerelation (without pressing clutch) Smiley
I'm still not sure what should I have change in maps. As far as it is MED 9.1 (2.0TFSI BWA) I think about settings like on the picture.
KFZWOP 10% row "value - 20", 15% row "value - 10".
I wonder to change CWSAWE to 1 (to use gargles without pressing clutch), or I should do not that?
Or maybe use ENSAKHG set to 63 like @KasperH did it?
Halp Cheesy
« Last Edit: October 22, 2019, 02:43:05 PM by razor1199 » Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #499 on: October 23, 2019, 11:27:53 PM »

Or maybe use ENSAKHG set to 63 like @KasperH did it?
okay so can we come to a conclusion as to what ENSAKHG is?
google translate has two definitions depending on if you put a space between katheizen. first definition is without space between kat and heizen second is with space.
1. Enable overrun shutdown during cathexis dependent on gear
2. Release Thrust shutdown in the case of catalytic heating
also how is it determined as to what value to set this at?
ENSAKHG exists in the Mbox damos address 11171
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #500 on: October 23, 2019, 11:42:38 PM »

okay so can we come to a conclusion as to what ENSAKHG is?
google translate has two definitions depending on if you put a space between katheizen. first definition is without space between kat and heizen second is with space.
1. Enable overrun shutdown during cathexis dependent on gear
2. Release Thrust shutdown in the case of catalytic heating
also how is it determined as to what value to set this at?
ENSAKHG exists in the Mbox damos address 11171

1) there is no universe where Kat heizen is anything but cat heating
2) did you bother check the FR? The bits are pretty explicitly explained there.
« Last Edit: October 23, 2019, 11:46:10 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #501 on: October 23, 2019, 11:53:51 PM »

1) there is no universe where Kat heizen is anything but cat heating
2) did you bother check the FR? The bits are pretty explicitly explained there.
you got it. i'll take a look now
thanks
Logged
razor1199
Jr. Member
**

Karma: +3/-1
Offline Offline

Posts: 44


« Reply #502 on: October 25, 2019, 10:10:25 PM »

you got it. i'll take a look now
thanks

Well, I won't touch ENSAKHG as far as I won't be sure what EXACTLY it does Wink.
Anyway, I've changed maps like on my picture above + I've changed CWSAWE. I just got 1, max 2 single pops when I let off throttle, but never on gear change, only when decelerating (and not always), when standing it does suprising 3 pops Cheesy.
I was wondering about reduce KFZWMN to -17deg, change KFTVSA to 3.5. I don't want to make large pops, bangs or flames, I just want gargles. (And maybe rescale LAMFA 50% to 10% and make something like 0.9 LAMBDA for this value, should I?)
Is my thinking in a good way or I should do more to get  gargles on MED9.1?
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #503 on: October 26, 2019, 12:04:09 AM »

Well, I won't touch ENSAKHG as far as I won't be sure what EXACTLY it does Wink.
Anyway, I've changed maps like on my picture above + I've changed CWSAWE. I just got 1, max 2 single pops when I let off throttle, but never on gear change, only when decelerating (and not always), when standing it does suprising 3 pops Cheesy.
I was wondering about reduce KFZWMN to -17deg, change KFTVSA to 3.5. I don't want to make large pops, bangs or flames, I just want gargles. (And maybe rescale LAMFA 50% to 10% and make something like 0.9 LAMBDA for this value, should I?)
Is my thinking in a good way or I should do more to get  gargles on MED9.1?
any retardation on the timing map produces a nice deep bang on gear shifts and obnoxious popping on decel depending at which rpm you have it at

my issue is since the timing is retarded, the car jutters when going back onto throttle. yet to solve that issue
Logged
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92


« Reply #504 on: November 05, 2019, 07:43:20 AM »

my issue is since the timing is retarded, the car jutters when going back onto throttle. yet to solve that issue

This probably the cause of the fluctuation between the advance and the retardation of the ignition. Log ignition to see what it does at going back on throttle.
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #505 on: November 05, 2019, 08:23:21 PM »

This probably the cause of the fluctuation between the advance and the retardation of the ignition. Log ignition to see what it does at going back on throttle.
that is exactly what it is doing. i knew this but felt it wasn't healthy so i just disabled the whole timing retardation deal for overrun
Logged
todotrapo
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 15


« Reply #506 on: November 08, 2019, 04:18:37 AM »

Hi, can someone tell me the maps for ME7.5 512 kb. These ECU do not have all the maps that you decide regarding the MED or ME7.5 1024kb.
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #507 on: November 08, 2019, 09:46:39 AM »

Hi, can someone tell me the maps for ME7.5 512 kb. These ECU do not have all the maps that you decide regarding the MED or ME7.5 1024kb.
are we supposed to guess what ecu you have?
post your ecu # and version
Logged
todotrapo
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 15


« Reply #508 on: November 08, 2019, 10:08:54 AM »

You're right.

Audi TT 1.8t
Code engine:APX
Bosch: HW 0261207030
          SW 1037354178
VW SW: 8N0906018AE 0001
Year:1999

Regards
Logged
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79


« Reply #509 on: November 13, 2019, 12:16:22 PM »

Does anyone know the map name for fuel cut in VAG Marelli 7GV ECU? Something like a kfnwegm or kftvsa found in Bosch
Logged
Pages: 1 ... 32 33 [34] 35 36 ... 43
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 18 queries. (Pretty URLs adds 0s, 0q)