Pages: 1 ... 5 6 [7] 8 9 ... 16
Author Topic: Tuning instrument cluster gauges for Audi/VW/Seat/Skoda  (Read 125993 times)
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #90 on: November 08, 2017, 08:07:18 AM »

What's a winolx? Rather search for magic  dash can or something similar
Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #91 on: November 13, 2017, 03:25:56 PM »

I can see that I can connect to 17cluster using vagcanpro  and read part of eeprom but just 248bits of if when start from adress $100 of it instead of 2048 as in other dumps. Do You know where is it located or how to read it?


Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
sandor1987
Jr. Member
**

Karma: +5/-4
Offline Offline

Posts: 46


« Reply #92 on: November 14, 2017, 06:02:14 AM »

I can see that I can connect to 17cluster using vagcanpro  and read part of eeprom but just 248bits of if when start from adress $100 of it instead of 2048 as in other dumps. Do You know where is it located or how to read it?


Wysłane z mojego HTC U11 przy użyciu Tapatalka



DONT USE CLONE VCP for eeprom!!!!!
it dont work... only original VCP works with eeprom Wink
Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #93 on: November 14, 2017, 01:11:19 PM »

DONT USE CLONE VCP for eeprom!!!!!
it dont work... only original VCP works with eeprom Wink
Well clone worked very well to change eeprom in 5f mmi3g+ in USA to eu conversion,  why won't it work with instrument?

Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
pohsib
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 12


« Reply #94 on: November 30, 2017, 02:52:16 PM »

Who here can tune these clusters?  Tried messaging OP.  I need mine tuned and will pay!! PM me!
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #95 on: December 01, 2017, 01:15:16 AM »

What do you mean tuned?
Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #96 on: December 02, 2017, 01:15:26 PM »

I'm willing to pay for helping me read eeprom from q5 8r same as a4 b8 as I need to adjust speed arrow on scale

Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
automan001
Full Member
***

Karma: +47/-0
Offline Offline

Posts: 153


« Reply #97 on: December 05, 2017, 08:08:13 AM »

Tried messaging OP.  I need mine tuned and will pay!! PM me!
Hi everybody,
Temporarily I'm not into tuning clusters. I've changed my job and now there is less time for my hobby (clusters & ecu). Also I've changed my car to a newer, so there is no real car to make experiments. It doesn't mean I quit. Post your dumps here, ask here and maybe I or someone else will answer.

In general the steps how to modify cluster is very simple:
- You should read dump of your original cluster
- Optionally, get dump of the other cluster, covers of which you like (ask those who own such clusters or find in the internet)
- Find curves in the dump (tables with arrow positions). When you open them in WinOls or in something similar you will see shapes
- Change them, or just copy paste areas from the cluster you know fits your covers
- Load the new dump into your cluster
- Enjoy result Wink
« Last Edit: December 05, 2017, 08:20:12 AM by automan001 » Logged
automan001
Full Member
***

Karma: +47/-0
Offline Offline

Posts: 153


« Reply #98 on: December 05, 2017, 08:18:53 AM »

For some period of time I used VAG K+CAN cable with VAG K+CAN Commander software to read dumps. Also you can read them by using cheap Chinese K-Line (VAG-COM) cable clone & VAG EEPROM Programmer software.
« Last Edit: December 05, 2017, 08:24:28 AM by automan001 » Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #99 on: December 05, 2017, 10:11:59 AM »



For some period of time I used VAG K+CAN cable with VAG K+CAN Commander software to read dumps. Also you can read them by using cheap Chinese K-Line (VAG-COM) cable clone & VAG EEPROM Programmer software.

Perfect I do have 17.3 vcds cable from aliexpress. Can I use it for Kombiinstr J285, 8R0920981N, driver H35 soft 0567 with vag eeprom programmer.  If yes can You please describe which values to use with it to read eeprom from my car?

Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #100 on: January 19, 2018, 03:35:33 PM »

8N marelli cluster

Address 0x38 0x39

CE FF = 170mph dials

CD 9E = 160mph dials
Logged
sandor1987
Jr. Member
**

Karma: +5/-4
Offline Offline

Posts: 46


« Reply #101 on: January 19, 2018, 03:51:18 PM »

Well clone worked very well to change eeprom in 5f mmi3g+ in USA to eu conversion,  why won't it work with instrument?

Wysłane z mojego HTC U11 przy użyciu Tapatalka



it fucks my coding up at a mk5 and mk6.

Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #102 on: January 19, 2018, 04:26:43 PM »

8N marelli cluster

Address 0x38 0x39

CE FF = 170mph dials

CD 9E = 160mph dials
Can you plese be more precise?
Which tool should I use? Vagcanpro?
Can You guide me step by step.

Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
lukjod
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #103 on: January 20, 2018, 07:38:02 AM »

Only thing which I can get thru vagcanpro is to read a few bytes from $100 as on pictures but nothing comparable with posted above Marelli pattern

Wysłane z mojego HTC U11 przy użyciu Tapatalka

Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #104 on: January 22, 2018, 01:47:10 PM »

i posted so i dont forget what the change is. 

Very rare to have 170mph silk screen on mk1 TT clusters. I then successfully crossed flashed immo 3 cluster to different part number
Logged
Pages: 1 ... 5 6 [7] 8 9 ... 16
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 18 queries. (Pretty URLs adds 0s, 0q)