s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1590 on: August 28, 2022, 04:36:21 AM »
|
|
|
What in the Looney Tunes circus is going on here?
You can't tell him how to unencrypt it? Why is it a Secret? Always a Secret!!
Is this a Hilton thing? (If so, are you licensed by him via the W3 platform in the License file?) Or a Volvo Thing? Why not explain how it's done? Teach. This is already 10 times more complicated than it should be. Read Flash = Bin I wouldn't count on you.
Nobody gives a Shit about your Build. Maybe you should keep your build a secret too! License and patent it.
You're a fuckin Troll.
bruh
|
|
|
Logged
|
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1591 on: August 28, 2022, 04:39:55 AM »
|
|
|
Probably leave the guy alone. I am sure he is not the leak but somebody who somehow got ahold of the data. Or do you think, the people who's name is on the various Funktionsrahmen for Volvo ME7 are leaks either?
In terms of what software was used inside Volvo to tune ME7, ME9, Diesel etc., it is called VAT2000. In order to work with it you need a project file for your particular software version, e.g. in my case 5XQH.
A project file is about 2 MB in ZIP and decompressed about 20 MB. See screenshots.
I'm just seeing this now .. wtf... how do we get the project file for our software mines the 50GPHJ
|
|
|
Logged
|
|
|
|
SparkyR
Full Member
Karma: +17/-21
Offline
Posts: 77
|
|
« Reply #1592 on: August 28, 2022, 06:52:18 AM »
|
|
|
You write a set of instructions that analyzes the pin code in the vlic. This will then unscramble the 64 bit encryption. Or you can read the ecm with a kess ktag, io terminal, Or Promateys released software https://s4wiki.com/wiki/Boot_mode
|
|
« Last Edit: August 28, 2022, 07:00:08 AM by SparkyR »
|
Logged
|
2005 S60R m66, Xona Rotor 7864, turbosmart 45mm wastegate, id1700cc injectors
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1593 on: August 28, 2022, 11:29:57 AM »
|
|
|
You write a set of instructions that analyzes the pin code in the vlic. This will then unscramble the 64 bit encryption. Or you can read the ecm with a kess ktag, io terminal, Or Promateys released software https://s4wiki.com/wiki/Boot_modeprometeys tools look promising but there's no command to read the flash only flashing
|
|
|
Logged
|
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1594 on: August 28, 2022, 02:08:02 PM »
|
|
|
how much for this tool serious question how much for a license free non bin encrypting tool.... and how mUcH to make it Open source so this gatekeeping bs will fucking stop
|
|
|
Logged
|
|
|
|
prometey1982
|
|
« Reply #1595 on: August 29, 2022, 01:44:46 AM »
|
|
|
how much for this tool serious question how much for a license free non bin encrypting tool.... and how mUcH to make it Open source so this gatekeeping bs will fucking stop
There is no money price for this. As asshole Vollmer said I'm expecting community collaboration. Still expecting. But there was no collaboration yet. So you must prove your serious intentions by actions not words. Only in this case I'll open sources of the GUI tool with logging, reading and flashing. At the monent you have enough tools to educate yourself and make benefit to the community. Let's do it.
|
|
|
Logged
|
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1596 on: August 29, 2022, 04:03:20 AM »
|
|
|
There is no money price for this. As asshole Vollmer said I'm expecting community collaboration. Still expecting. But there was no collaboration yet. So you must prove your serious intentions by actions not words. Only in this case I'll open sources of the GUI tool with logging, reading and flashing. At the monent you have enough tools to educate yourself and make benefit to the community. Let's do it.
I have something legit with a license given to me by the provider, but after opening it in dotpeek decompiler it's just a fork of Hilton's tuning suite which isn't available anymore. which is stolen from dream3r and monetized. r.i.p it allows me to log, etc .. the reading just encrypts the output. I work 60-70 hours a week. I'm just a hobbyist. this shit should be open source from the start it's such a niche scene. Vollmer is actually a nice guy we sit on discord screen sharing finding Def's in winOLS found the Audi S4 MAF curve to put on our cars etc....lined it up on a random s60r dump on here to practice did a few actually and found them all. my ADHD literally has had me up since Friday 6pm and it's now Monday 7am with my brain spinning and spinning. idk... have a good day I guess we're green af if I had the knowledge I'd have full YouTube series of step by step tutorials for others to learn too. idk guess it's just different mindsets. I wanna be able to dump the bin unencrypted from a car that I own... I will not be able to.. nor want to compete for your customers. picture blurred for privacy reasons
|
|
|
Logged
|
|
|
|
prometey1982
|
|
« Reply #1597 on: August 29, 2022, 04:25:45 AM »
|
|
|
You can backup your ECU by Galetto 1280 tool on a bench in boot mode.
|
|
|
Logged
|
|
|
|
Vollmer
Full Member
Karma: +14/-255
Offline
Posts: 78
Professional Cat Herder
|
|
« Reply #1598 on: August 29, 2022, 08:28:33 AM »
|
|
|
Oh thats really fuckin Convenient.
Thanks for sharing your OBD utility, Prometey Your flasher has no Help, instruction sheet, or obvious read function in the source code.
Why are you such a selfish pig? Must be the Russian in you.
Can't take responsibility for you own fuckin actions, still. Blame it on me, you Spineless Worm.
I don't see what value you are to this community. Might as well GTFO (and never come back). If all you have to offer is that shit on your github, well then you don't have much to offer at all.
You haven't helped in the last few years, I don't believe you ever will. You will always be a Chode.
...Turns out all the US tuners, including the aforementioned scammer, still suck off Hilton's unit. They can't make anything for themselves either.
SparkyR, Writing more Bullshit novels huh? I bet you have no fuckin idea how to do ANYTHING you said. ....Not to mention you don't do that.
You are lying.. Litterally and verifyably by this series of posts. You have no Idea how to unencrpyt it, you use Hiltons shit. Cause you don't know. Why do you feel the need to talk out your ass to feel smart and knowledgeable? You aren't.. and it shows..
Because if you did know, you would explain how to do it.. But you dont, so you spew a bunch of BULLSHIT to intimidate people from tuning
so you can continue ripping people off for the garbage you produce
What a useless dirtbag community.
|
|
« Last Edit: August 29, 2022, 08:33:50 AM by Vollmer »
|
Logged
|
Volvo HALL of SHAME:
Guitar24t aka Robert Hilton SparkyR aka Brandon Halme Prometey1982 aka Artem Vasiliev MAXX ECU - Brett Willet VIDA Leach - David Leech
Useless Twats: PRJ - Dmitri from Estonia
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1599 on: August 29, 2022, 08:31:29 AM »
|
|
|
Oh thats really fuckin Convenient.
Thanks for sharing your OBD utility, Prometey
Why are you such a selfish pig? Must be the Russian in you.
Can't take responsibility for you own fuckin actions, still. Blame it on me, you Spineless Worm.
I don't see what value you are to this community. Might as well GTFO (and never come back).
You haven't helped in the last few years, I don't believe you ever will. You will always be a Chode
...Turns out all the US tuners, including the aforementioned scammer, still suck off Hilton's unit. They can't make anything for themselves either.
What a useless dirtbag community.
|
|
|
Logged
|
|
|
|
Vollmer
Full Member
Karma: +14/-255
Offline
Posts: 78
Professional Cat Herder
|
|
« Reply #1600 on: August 29, 2022, 08:38:43 AM »
|
|
|
Oh look! 2 Useless piles of shit!!
Maybe I can find more trash?
Lets all work on our own encrypted half baked shit software, instead of working together on it.
Cause I know everything!!
Yet, I am not capable of much, beyond talking smack and offering unhelpful advice!!
I am a shit tuner as well! I can't look outside my small little world!
/S
|
|
|
Logged
|
Volvo HALL of SHAME:
Guitar24t aka Robert Hilton SparkyR aka Brandon Halme Prometey1982 aka Artem Vasiliev MAXX ECU - Brett Willet VIDA Leach - David Leech
Useless Twats: PRJ - Dmitri from Estonia
|
|
|
Vollmer
Full Member
Karma: +14/-255
Offline
Posts: 78
Professional Cat Herder
|
|
« Reply #1601 on: August 29, 2022, 08:44:05 AM »
|
|
|
LOL at you little sissies Neg- repping S60Rawr
What has he done besides wanting to tune his own car, and not purchase one of your scams?
You guys can't be more scared of competition. You neg rep him cause he wants to try??
Do you think this helps your business at all?
You want real negative rep?
I can be absolutely sure when I say SparkyR Halme S60R S60RXtreme has lost several tunes worth "thousands" of dollars as a result of his bullshit and pedantic assholery around here, and on FB. ( I should post some of his FB posts, they are fucking Entertaining!!) Might as well say: "Just calibrate the turbo encabulator to the proper operating frequency and your differential nodes should be calculated". Because you are clearly incapable of whatever nonsense you suggest. I have at least 3 people I strongly turned away, and can't wait to steer more people away.
I will speak out against his work until the day I die, and will encourage others to do the same. Me, and others who are reading this thread, operate some of the more involved Volvo modifying groups. There is a large amount of enthusiasts that will know to stay well clear of anything you do
Great name you are building for yourself!! Alienating yourself more each day. Nobody will give a flying fuck about your projects, or anything you know. Your passion will become a waste - that people resent you for.
Keep it up!
|
|
« Last Edit: August 29, 2022, 08:50:51 AM by Vollmer »
|
Logged
|
Volvo HALL of SHAME:
Guitar24t aka Robert Hilton SparkyR aka Brandon Halme Prometey1982 aka Artem Vasiliev MAXX ECU - Brett Willet VIDA Leach - David Leech
Useless Twats: PRJ - Dmitri from Estonia
|
|
|
athlon
Newbie
Karma: +0/-0
Offline
Posts: 5
|
|
« Reply #1602 on: August 29, 2022, 10:33:16 AM »
|
|
|
This was pulled with Hiltons software. The binary you have is a Volvo encrypted binary so it is all scrambled together which will not do you any good. If you send me a vlic I can unencrypt it for you
Is this encrypted through Hiltons software while dumping? or just how Volvo communicates?
|
|
|
Logged
|
|
|
|
s60rawr
Full Member
Karma: +19/-854
Offline
Posts: 149
|
|
« Reply #1603 on: August 29, 2022, 11:08:45 AM »
|
|
|
Is this encrypted through Hiltons software while dumping? or just how Volvo communicates?
this is hiltons tuning suite that he used to offer on his page, i believe it was "self tuning" i assume he had a version for other businesses aka shem etc.... and he made a version with their logo etc... but its all hiltons shit on the back end along with his corruption. if you go throught the code it always links to volvotuners.com which forwards you to hiltons page. and even in the dotpeek jetBeans debugger i have it shows it as hiltons tuning suite etc.... he doesnt have it available on his page anymore and i assume there's a transaction or something for how many licenses they can supply etc.... long story short, hilton is a big reason to why we're stuck like this. all he did was take dream3r's software work through the dice. and then put it behind some license shit and encryption bs
|
|
|
Logged
|
|
|
|
SparkyR
Full Member
Karma: +17/-21
Offline
Posts: 77
|
|
« Reply #1604 on: August 29, 2022, 11:16:56 AM »
|
|
|
|
|
|
Logged
|
2005 S60R m66, Xona Rotor 7864, turbosmart 45mm wastegate, id1700cc injectors
|
|
|
|