Pages: 1 2 [3] 4 5 ... 7
Author Topic: Galletto software edited with PROPER ENGLISH  (Read 165473 times)
aysix
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 37


« Reply #30 on: March 27, 2013, 10:36:37 AM »

This is very nice. The original english version is hilarious.
Logged

Silly Rabbit 6 speed A6
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176


« Reply #31 on: April 08, 2013, 07:07:15 AM »

I don't think it's going into Boot Mode. Or I totally screwed something up.

Connecting...
Starting bootstrap loader upload.
Sent bootstrap init zero byte.
Sent bootstrap init zero byte.
Sent bootstrap init zero byte.
Bootstrap loader upload failed. Failed to receive device ID response for init zero byte.
Disconnected
Hi ddillenger!

How are you?

Did you solve the issue above? I have the same one in nefmoto flasher.

Logged
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176


« Reply #32 on: April 08, 2013, 08:18:11 AM »

Hi ddillenger!

How are you?

Did you solve the issue above? I have the same one in nefmoto flasher.


I've found answer on my question here http://nefariousmotorsports.com/forum/index.php?topic=3387.msg36674#msg36674
Thanks a lot!
Logged
tbm
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 176


« Reply #33 on: April 08, 2013, 10:41:53 AM »

ddillenger you are the man!!!
your approach has helped me, thanks a lot!!!
Logged
cossie1
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 26


« Reply #34 on: May 16, 2013, 01:36:27 PM »

Am I correct in thinking doing this will make Galletto 1260 software work with any FTDI cable ?
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367


« Reply #35 on: May 16, 2013, 01:42:17 PM »

Am I correct in thinking doing this will make Galletto 1260 software work with any FTDI cable ?
Yes.
Logged
cossie1
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 26


« Reply #36 on: May 16, 2013, 02:21:18 PM »

Yes.

Thats great news, as I have lots of different FTDI cables Smiley
Logged
MyTunes
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 82


« Reply #37 on: May 30, 2013, 12:01:38 PM »

Thank you for this ddillenger!

Much easier to understand  Grin

Has anyone ever messed with the EEPROM option?
On every version I've seen it is grayed out and the flash is always selected.

Just curious Smiley
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #38 on: June 16, 2013, 09:04:49 PM »

for anyone that has issues finding the offset posted above for hex'n galletto "0x249E90 in the galletto executable. As it is, that serial is 47514789"

for some reason in the latest version i couldn't find that offset.. if you have the same issue just search for the cable # you're replacing 47514789

then right click in the window in the hex editor to the right and select replace ... itll convert the binary/hex/acsii for you when you type in the number of your cable...


hope this helps some people  Cool
Logged

stage 3 b5 S4
MTRI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #39 on: July 10, 2013, 01:23:46 AM »

My Serial has letters and numbers, I typed it in has shown in MProg. I checked again after i saved it and it is still there. I read above on this thread that I ASCII is used for conversion to digits, Since I typed in the serial with the letter am i going to have a problem?

Update.
It converts the serial (letters and number) to HEX.

I am going to try and see tomorrow if i can read my ECU and get a .BIN file. Also flash (write) a modified .BIN file
« Last Edit: July 10, 2013, 01:31:29 AM by MTRI » Logged
MTRI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #40 on: July 10, 2013, 03:37:13 PM »

I need help.
I changed one setting on my ECU MSS54 BMW E46 M3, I changed the Enable Sport Mode Always ON. I tried to flash the ECU back and it stops at 72%. Can someone help me out why is not working?

E.
Logged
mk4monster
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #41 on: July 20, 2013, 04:49:10 AM »

urgent help needed! i've done what it states in this thread over 10 times today using a couple of different tfdi cables, switched off anti virus ect and every time i open up program, select car and click read ecu it freezes on this screen! any suggestions?
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #42 on: July 20, 2013, 12:02:55 PM »

Only works via bootmode when not using a galletto cable.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
IbizaNH
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #43 on: August 06, 2013, 03:36:34 AM »

Oops. I could've sworn I read "EDC15"

EDC16 = no bootmode. Only BDM.

Hi i use Galletto to read and flash edc15P via OBD, without any issue.

I use XP SP3 with latest FTDI drivers and Galleto clone.

Cheers
Logged
Audivr6
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 11


« Reply #44 on: November 20, 2013, 08:54:51 AM »

I am looking at that address and the only coding there is zeros, mk4 vr6 ecu KW1281 protocol flash chip 29F400BB, 9504903 immo chip me7.1 G, nothing I have tried for boot mode is working and my hex+can cable won't let me communicate with immobilser module 25 or security 16 also this is a AAA vr6 in 98 A4 shell I already ordered cynosure programmer with clip hut was hoping my galletto/ebayblue/hex+can would work but so far no dice.

Tried:
Ground pin 24 2-3 sec
Installvdrivers every which way
Uninstalled vag com and drivers
Nefmoto tool nothing will communicate with ecu but hex+can on vag system
note I cannot set the com port in device manger it gives no option under lpt/com port only in USB section I see ftdi device with no com settings 
Logged
Pages: 1 2 [3] 4 5 ... 7
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.048 seconds with 18 queries. (Pretty URLs adds 0s, 0q)