NefMoto > Technical > NefMoto Software > Recommended USB VAG KKL Cables
Pages: 1 ... 5 6 [7] 8 9 ... 11
« previous next »
Author Topic: Recommended USB VAG KKL Cables  (Read 421843 times)
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162
« Reply #90 on: August 29, 2013, 09:27:40 PM »
MSG him on eBay
Logged
stage 3 b5 S4
kory2000pr
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 63
« Reply #91 on: August 20, 2014, 05:36:25 PM »
http://www.ebay.com/itm/231026556048?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Just got this one today.
Cable is no good. ch inside.
Logged
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123
« Reply #92 on: September 09, 2014, 10:42:50 PM »
http://www.ebay.com/itm/VAG-COM-USB-KKL-409-1-cable-for-AUDI-VW-OBD2-OBD-2-/321180765164?hash=item4ac7dd8bec&item=321180765164&pt=Motors_Automotive_Tools&vxp=mtr

gunna try this one. says it has the right chip is description.
Logged
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97
« Reply #93 on: September 29, 2014, 09:34:46 AM »
Anyone know if this is working with nefmoto?

http://www.ebay.co.uk/itm/AutoDia-K409-Interface-USB-VAG-KKL-OBD-2-VW-Audi-Seat-Skoda-Diagnose-Software-/151015643685?pt=Elektroger%C3%A4te&hash=item23293bda25
Logged
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147
« Reply #94 on: October 10, 2014, 04:48:45 PM »
Quote from: mrdave on May 02, 2013, 08:10:46 PM
I recently purchased this cable:  http://www.amazon.com/gp/product/B008HO23OC/

And it has FT232RL and LM339 chips, if anyone is interested. 


Do Not buy THIS one. It comes with the CH340 chip in it. Not compatible.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #95 on: October 10, 2014, 04:54:03 PM »
Unless it SAYS FTDI, don't buy it. Most sellers just buy the cheapest cables they can get, and it turns into luck of the draw.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97
« Reply #96 on: October 13, 2014, 04:29:05 AM »
Quote from: KmosK04 on September 29, 2014, 09:34:46 AM
Anyone know if this is working with nefmoto?

http://www.ebay.co.uk/itm/AutoDia-K409-Interface-USB-VAG-KKL-OBD-2-VW-Audi-Seat-Skoda-Diagnose-Software-/151015643685?pt=Elektroger%C3%A4te&hash=item23293bda25

Works great!
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #97 on: October 22, 2014, 11:46:54 AM »
Just a heads up... latest windows FTDI drivers *permanently* disable FTDI232 knockoffs

http://nefariousmotorsports.com/forum/index.php?topic=7101.0
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
guentherkapp
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #98 on: November 09, 2014, 05:24:09 PM »
Does anyone know of any technical or none-technical (maybe business) reasons why the Eurodyne flash cable would not work?  Roll Eyes
I tested it today and only got as far as getting the following messages in the Status Windows.
  • Failed to read test echo from FTDI device
  • Could not open FTDI device

Please be so kind and note - I have installed the latest FTDI drivers and have no message or indication in the device manager that the FTDI device driver is not functional.

Please let me know.
Guenther
Logged
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« Reply #99 on: November 29, 2014, 12:11:20 PM »
I bought the blue end and clear cable
Title reads
Vag-com USB kkl 409.1 cable
Seller is game adventure
I have connected via nef and taken apart and actually seen the ftdi 232r chip.
Logged
undertaker
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #100 on: December 21, 2014, 10:15:41 AM »
Hello,

I use this hex-can clone and after many attempts I think I manage it to work.

http://www.xcar360.com/super-vag-com-12-12-vcds-english-german-french.html

I get usual message failed to read test echo from FTDI device.



So I do next.

First I set dumb mode in VCDS:



Then go to Nefmoto settings (VCDS was still opened in background) and uncheck ''Should verify cable in dumb mode'':



After that interface respond in slowinit and fastinit:




This all was done unplugged to car. So, still I need to try it in the car.
Logged
guentherkapp
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #101 on: December 21, 2014, 06:15:39 PM »
I bought this cable - USB Interface VAG KKL 409.1 OBD2 Cable VAG-COM for VW AUDI Seat Skoda Jetta Bora. It works very well with the com port and VAG-COM, but as soon as I try to set it to USB as suggested the Getting Started guide threat - I get the message - Ross-Tech USB interface not found! interface: not found!  Huh
The device does also not appear in the Flasher Logger device list.
Any ideas and suggestions?

Please let me know.

Guenther

Just in case, if this could be helpful.
The com port identifies itself as USB-SERIAL CH340 port in the ports (com & LPT) section of the Device Manager.
« Last Edit: December 21, 2014, 06:44:02 PM by guentherkapp » Logged
motorkompf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7

Ryan Weiss
« Reply #102 on: February 19, 2015, 01:24:44 PM »
http://www.ebay.com/itm/Blue-VAG-COM-USB-KKL-409-1-Cable-OBD2-OBDII-FT232RL-KWP2000-ISO9141-FOR-VW-AUDI-/111579011497?
Does this cable meet the requirements? thanks in advance
« Last Edit: February 19, 2015, 01:43:03 PM by motorkompf » Logged
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« Reply #103 on: February 28, 2015, 12:32:21 AM »
Ok well you can use the ross tech genuine cable. You might need to install it as a vcp which you can do under the ross tech software website. Although in my experience its best to use a clone and to install it as a vcp to a certain port.
Logged
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« Reply #104 on: February 28, 2015, 12:33:26 AM »
You need a FTDI 232r chord. There is many cheep knock offs but it has to have this.
Logged
Pages: 1 ... 5 6 [7] 8 9 ... 11
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 05:59:20 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.039 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)